Omron PLC CS1D-CPU67H

03/14/2021

Maintenance of servo drive

1.Maintenance of operating environment of servo driver In order to prolong the service life of the servo driver, the following problems should be paid attention to in the process of use. Temperature, humidity, dust, vibration, input voltage and other factors should be considered for the system environment.

08/19/2020

Why do industrial chillers need to replace high-quality antifreeze regularly

When the industrial chiller is running, there are high requirements for the use of antifreeze. Ordinary equipment cannot use high concentration antifreeze. If the concentration of antifreeze is high, it takes a long time to warm up before operating the equipment.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

09/12/2022

Choose the Right Circuit Breaker?

Circuit breakers are widely used in electromechanical equipment and circuits. However, as different protected objects have different abilities of overload current bearing

08/08/2020

Reasons for condensation at the bottom of the condenser

Reasons for condensation at the bottom of the condenser 1. It is abnormal if condensation occurs at the bottom of the condenser when the unit is running. It may be the reason for the low amount of refrigerant.

09/20/2022

How to Select a Hydraulic Pump

When choosing a hydraulic pump, the following aspects can be considered.

09/03/2020

Introduction of simple pressure vessel and fixed pressure vessel for air compressor gas storage tank

As the fourth most widely used energy source, compressed air is second only to traditional energy sources such as electric energy. As a necessary product for air compressors, compressed air is widely used in various fields of national production and life in my country.

08/11/2020

Installation conditions and precautions of refrigeration compressors

The selection of the installation site is most ignored by the staff. Often after the compressor is purchased, you can find a location and use it immediately after piping. There is no prior planning at all.

06/27/2020

The sign of the normal operation of the refrigeration unit

The sign of the normal operation of the refrigeration unit 1. There is no knocking sound in the piston refrigeration compressor, the compressor is operating normally, the expansion valve opening is adjusted properly, and there is only compressor suction and exhaust sound during operation, and no knocking or other abnormal sounds are produced.

08/17/2020

Why is the meter still running after the air conditioner is shut down

In the process of using home appliances, friends will always encounter some weird problems more or less. For example, the air conditioner makes strange noises, the soymilk machine suddenly stops turning, and so on