Omron Sensor E3V3-R61-11

03/15/2021

ALPHA Alpha Servo Drive Repair

Common faults of Alpha servo drives include: power-on without display, with display without output, overcurrent, overvoltage, undervoltage, overheating, overload, overspeed, phase loss, jitter, encoder abnormality, module damage, ground fault, parameters Errors etc.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

08/15/2020

Precautions for operation of cold storage evaporator

Cold storage evaporators can be divided into two categories: air coolers and cooling pipes. Air coolers are generally used in cooling rooms, freezing rooms and cooling reduction rooms for cooling objects.

09/08/2020

What is the main purpose of the inverter Which projects are generally used for

Inverter is a device that converts industrial frequency power (50Hz or 60Hz) into AC power of various frequencies to realize variable-speed operation of the motor. The control circuit completes the control of the main circuit, the rectifier circuit converts alternating current into direct current,

09/06/2020

Basic knowledge of PID regulation and PID

What is PID regulation and the basic knowledge of PID At present, the level of industrial automation has become an important indicator of the modernization level of various industries.

07/05/2020

Hitachi heat pump compressor

Does the compressor not start related to the four-way valve? There is no relationship between the compressor does not start and the four-way valve. Therefore, when the four-way valve coil is damaged, it will not cause the air-conditioning compressor to fail to start normally, nor will the compressor start normally after the good four-way valve coil is replaced.

09/02/2020

7 reasons for high oil consumption of air compressors

Run oil In our daily work, we often encounter the problem of running oil in air compressors. In addition to the quality of the oil content, what other reasons can cause running oil? Engineers have summarized several reasons that can cause running oil in practice. The following okmarts .com share with you.

09/22/2020

The development history of single screw machine

1. The history and current situation of single screw compressor 　　 In 1960, France's B. Zimmern proposed the idea of ​​a single screw compressor and obtained a patent. In 1962, the first prototype was trial-produced, and it was officially produced and put on the market by Peugeot in the early 1970s.

07/27/2020

Cause analysis of common failures of compressors with heat transfer oil heating system

Cause analysis of common failures of compressors with heat transfer oil heating system<br></br>

12/06/2020

The working principle of oxygen generator (oxygen machine)

The working principle of oxygen generator (oxygen machine) The oxygen generator adopts pressure swing adsorption (PSA)-pressure adsorption and atmospheric pressure desorption (HP) method. After the raw material air is pressurized by an oil-free compressor,