P+F Pepperl Fuchs Sensor NBB10-30GK50-E0-M

08/29/2020

Compressed air technology is moving towards an era of high efficiency

Compressed air is the most widely used energy source in industry and commerce, in addition to electricity. Its wide application stems from its easy operation, fast speed, high power density, safety and good compatibility, but its higher cost cannot be ignored...

08/14/2020

How to select the cooling fan in the floor heating and air conditioning system

For many dealers in the north, the heating end may be familiar, but they are not very confident in the cooling end. In our WeChat group, dealers often consult related questions.

08/20/2020

Analysis and troubleshooting of common faults in cold and hot water air conditioning systems

Common faults of cold and hot water air conditioning systems mainly come from three major parts: the refrigeration system, the water pipe system and the surrounding environment.

09/05/2020

What are the reasons for excessive oil content in exhaust gas and how to deal with it

1) The screw oil level is too high. If the oil level is too high, the fluctuation of the liquid level in the oil and gas barrels during the operation of the unit will cause a large amount of gas to enter the oi

08/17/2020

Causes and treatment of cracks at the inlet of the cooler

The crack at the inlet and outlet of the cooler is a kind of brittle crack, which is generally manifested as a crack at the tip of the toothed plate, and then cracks along the intergranular.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

06/22/2020

What is the air conditioner that only cools

An air conditioner with only a cooling function is called a single cooling type air conditioner. 1. The single-cooled air conditioner is used in areas in the north or the south that are not cold in winter; 2. The single-cooled air conditioner model generally starts with KF; 3. Before you use the single-cooled air conditioner again, you need to clean and maintain first; 4 1. When using a single-cooling air conditioner in summer, the temperature cannot be set too low. Generally, the air conditioner temperature should be set to 26-27 degrees. <img src="{{media url=&quot;magefan_blog/What_is_the_air_conditioner_that_only_cools.jpg&quot;}}" alt="" />

06/14/2020

Top 10 common faults in maintenance and debugging of refrigeration systems

What is the effect of pressure and temperature on the refrigeration system Refrigeration system performance testing involves many aspects, of which pressure and temperature are two points that cannot be bypassed. Today we will take a look at the pressure器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦

06/30/2020

You should know the normal working condition of the compressor in the cold storage

You should know the normal working condition of the compressor in the cold storage 1. The suction temperature of the compressor should be 5-15℃ higher than the evaporation temperature.

08/16/2020

How to prevent clogging of high temperature heat pump dryer bag

The main reason for the clogging of the dust collector bag of the high temperature heat pump dryer is that the filtering wind speed is too large, the dust is too fine, the dust is sticky, the dust bag is not cleaned, and the dust bag is damp.