P+F Pepperl Fuchs Sensor OBT20-R2-E2-0,2M-V31

08/31/2020

Data analysis of air compressor energy consumption and heat recovery benefit

1. Compressed air energy consumption and cost analysis 　　 Compressed air is one of the most widely used power sources in the industrial field. Due to its many advantages such as safety, pollution-free, good adjustment performance, and convenient transportation,

08/20/2020

Several key selection points of screw chillers

How can it be used in combination to achieve the effect and use it at the lowest operating cost? Therefore, the selection has become a very critical part. In industrial production, mechanical equipment will generate heat during operation.

08/08/2020

How high does the family multi-connected central air conditioner ceiling need to be

How high does the family multi-connected central air conditioner ceiling need to be The reason why many people choose home central air conditioners may be that they look more beautiful and will not spoil the decoration effect of the whole home.

01/31/2023

What is a Gear Reducer?

The gear reducer is an independent enclosed transmission gear between the prime mover and the machine, which is used to reduce the speed and increase the torque to meet the work needs.

09/04/2020

How are commonly used filters classified

The impurities contained in the compressed air of the pneumatic system are divided into four categories: solid dust, moisture, oil mist and odor. In order to meet the requirements of different industrial sectors on the quality of compressed air,

02/27/2025

Cooling Tower: Components, Working Principle, Types, Applications, and Precautions

A cooling tower is a device that uses the contact between water and air through the process of evaporation to dissipate waste heat generated in industrial or air conditioning systems.

08/20/2025

What’s the Difference between Semi-Hermetic Compressors and Hermetic Compressors?

In the hermetic compressor, the motor and the compressor share the main shaft (reciprocating type)

07/17/2020

Piston compressor use and maintenance technology

Preparation before start-up: Operation, repair and maintenance must be carried out by self-made people. The compressor should be unsealed and cleaned before use, and check whether there is rust on each friction surface. The rust phenomenon should be cleaned with oilstone grinding and clean, and the friction surface should be coated with lubricating oil after unsealing.

06/29/2020

What is the cause of compressor pipeline vibration

08/21/2020

Why the air-conditioning supplyreturn water temperature is 7℃-12℃

Reason analysis of 7 degree water supply: 　　 1. Starting from the refrigeration unit, the refrigerant evaporates in the evaporator and absorbs heat to cool the secondary side water. If the evaporation temperature is too low, it will cause frost on the surface of the evaporator and affect the heat transfer efficiency.