PALL Filter UE319AT20Z

09/14/2020

Common troubleshooting methods for twin screw compressors

Common troubleshooting of twin screw compressor 1. Trouble phenomenon The exhaust temperature of the unit is high (over 100 degrees) The coolant level of the unit is too low (should be visible in the oil glass but not more than half) Dirty oil cooler

07/09/2022

Components and Types of Mechanical Seals

A mechanical seal is a device used on a rotating shaft to keep fluids in and contaminants out. It prevents the fluid moved through an asset, most often a centrifugal pump, from leaking.

09/28/2022

What is a Sliding Vane Pump?

<strong>Sliding vane pump</strong> is also called vane pump, <strong>rotary vane pump</strong>, mainly composed of a rotor

08/02/2020

How to choose a mobile cold storage

Mobile cold storage is also called combined cold storage, movable cold storage, and assembled cold storage. It is a new type of cold storage corresponding to the traditional civil cold storage.

08/24/2020

Self-taught, fixed-speed air conditioner power consumption can be easily calculated

In summer, many friends worry about the electricity cost of the air conditioner at home, turning it on for a while, turning it off for a while, turning it on for a while when it’s hot, and turning it off for a while.

06/29/2020

Compression ratio of American Copeland compressor

08/15/2020

What should be paid attention to when handling refrigeration equipment

Precautions for the handling of refrigeration equipment-Do not put it down during transportation. A series of matters must be paid attention to during the transportation of refrigeration equipment.

09/16/2020

Why can't I repair the cold welding machine Easy to fall off

Question: Why can't the patching machine be fixed? Easy to fall off? Answer: The main reasons for the failure to fix are: 1. The surface of the mold is not cleaned, and there are impurities such as oil, dirt, and oxides between the supplement and the mold.

05/21/2025

Have you figured out the "enthalpy" and "entropy" of the refrigeration system?

1. Enthalpy<br></br> It is a kind of energy, used to indicate the thermal state parameter of the state of the refrigerant, it represents the size of the total energy of the refrigerant; namely:

05/07/2025

How to Reset a Refrigerator Compressor: a Step-by-Step Guide

If your refrigerator is not cooling properly or is making strange noises, it may be time to reset the compressor.