PARKER Filter G04112

09/06/2020

Do you really understand adsorption dryers

All atmospheric air contains water vapor: higher in high temperature, lower in low temperature. When air is compressed, the density of water vapor also increases. In order to avoid the interference of condensate in the pipes and connected equipment,

08/24/2020

8 standard processes for central air conditioning installation!

In terms of home improvement, concealed projects include water and electricity, there is also central air-conditioning, and central air-conditioning has three points of quality and seven points of installation;

08/07/2020

How to deal with the burnout of the air conditioner compressor pile head

The compressor is an important part of the air-conditioning equipment. Due to its large current, the temperature is sometimes low and sometimes high, which easily causes moisture adsorption. During maintenance,

05/19/2022

PLC Analog Input

PLC analog inputs usually use voltage signals in the range of 20 volts and current signals in mA. Each PLC manufacturer has I / O modules to process these types of signals

07/19/2020

Advantages of adding economizer to screw chiller

The temperature control range of the standard screw chiller is 3～35℃, and the efficiency is significantly reduced when operating under lower temperature conditions. In order to meet the temperature requirements of more industries for chillers, make the single-stage screw compressor work according to the two-stage refrigeration cycle and achieve the effect of energy saving, an economizer can be added to the unit.

08/14/2020

What is the hazard of high temperature to compressor motor and lubricating oil

The heat generated by the compressor during normal operation should not cause overheating. Normal motor heating, compression heat and friction heat have been carefully considered when designing the compressor,

09/20/2020

Rolling bearing technology

Rolling bearing technology Rolling bearing temperature 　<br></br>　 The main factors of bearing operating temperature:

07/17/2020

Reasonably adjust the cold storage evaporator and defrost in time

Reasonably adjust the cold storage evaporator and defrost in time Generally speaking, every increase in the cold storage evaporation temperature can save energy Therefore, under the premise of satisfying the low refrigeration process of the product, the evaporation temperature can be increased as much as possible by adjusting the amount of liquid supplied. The thermal resistance of the frost layer is generally much larger than the thermal resistance of the steel pipe.

04/05/2024

Analysis and Solutions to AC Servo Motor Vibration Faults

AC servo motors are used in closed environments and are usually not easily damaged. But if the AC servo motor has vibration failure, what is the reason?

06/29/2020

What is the cause of compressor pipeline vibration