Puls Power Supply CP20.481

07/25/2020

The 9 types of compressor failure and hazard analysis are all in it! ! !

Start with liquid is a problem that easily occurs during shutdown. In the shutdown state, the refrigerant will migrate from the system back to the compressor and be deposited in the lubricating oil.

09/08/2020

Technical advantages of precision filters in compressed air systems

As we all know, the air contains many kinds of elements: water, rust, particulate dust and oil. These impurities will cause great loss to industrial production tools, so these impurities in the air must be removed.

09/17/2022

What is a Miniature Circuit Breaker?

The miniature circuit breaker (MCB) is suitable for overload and short-circuit protection of AC 50/60Hz rated voltage 230/400V

05/26/2025

Mitsubishi Heavy Industries-Haier AC Error Codes

When there is a problem with your Mitsubishi Heavy Industries-Haier air conditioning, you need to know the meaning of the fault code displayed on the thermostat and how to troubleshoot it.

08/15/2020

Simple treatment method after the refrigeration system enters water

Since the chiller has a water system, there is a possibility that the refrigerant system may enter water when it is used improperly. Therefore, a process guide is formulated for the problem of water ingress

08/20/2020

Common problems that should be paid attention to in the selection of cold storage forklifts

With the development of the Chinese economy and the increase in the urban population, the consumption level of the people continues to increase, and the demand for refrigerated food in the society is also showing explosive growth.

06/29/2020

Compression ratio of American Copeland compressor

11/09/2022

Comparisons between the Electronic Expansion Valve and the Capillary Tube

The electronic expansion valve (EEV) and the capillary tube (CT) are both commonly used throttling devices in the refrigeration and the air conditioning systems.

07/22/2022

How to Prime a Water Pump

Water pumps will run out of pressure and stop working if turned off for an extended period of time, such as over the winter.

06/30/2020

Causes of compressor burnout

Causes of compressor burnout Common failures of compressors are mainly the following three: 1. Motor burned out; 2. Liquid shock; 3. Oil shortage caused by refrigeration oil. 　　 Today I will give you a detailed analysis of the cause of the motor burnout.