Sanyo Compressor C-SB453H8A

08/09/2020

Can you answer these common basic knowledge questions about refrigeration compressors?

1. Why should the compressor run continuously for at least 5 minutes, and stop for at least 3 minutes after shutting down before restarting?

08/17/2020

Air conditioning unit filter and heat exchange equipment dust and scale treatment method

Summary: Dust and fouling occur on filters and heat exchangers, which are not economical for the operation of air conditioning units and cannot guarantee normal use requirements.

01/04/2024

3D Printer: Working Principle, Function of Components and Solutions to Overheating Problem

3D printing technology emerged in the mid-1990s. Its basic working principle is similar to regular printing. The printer contains powdered materials such as metal or plastic, which can be bonded together.

08/17/2020

Too high or too low oil pressure of industrial chillers affects normal operation

When using industrial chillers, regular inspection and maintenance work is essential. In the absence of basic maintenance and regular inspections, many industrial chillers are prone to different failures.

09/15/2020

84 water well liquid level sensor, anti-corrosion cable transmitter

84 water well liquid level sensor, anti-corrosion cable transmitter okmarts.com pressure sensor, okmarts.com pressure transmitter, okmarts.com pressure sensor PTH601 uses diffused silicon piezoresistive core or ceramic piezoresistive core, 316 stainless steel structure, mainly suitable for rivers, groundwater levels, reservoirs, water towers and containers, etc. liquid level measurement and control.

08/15/2020

What should be paid attention to when handling refrigeration equipment

Precautions for the handling of refrigeration equipment-Do not put it down during transportation. A series of matters must be paid attention to during the transportation of refrigeration equipment.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

08/16/2020

How to install a water-cooled screw chiller

Before using the water-cooled screw chiller, you need to know the installation requirements of the chiller, so that it will reduce a lot of unnecessary troubles during operation.

06/14/2020

Detailed process of refrigeration compressor replacement

Detailed process of refrigeration compressor replacement After confirming that there is only a problem with the compressor and it needs to be replaced, proceed to prepare for the replacement of the compressor. Specific steps are as follows:

09/08/2020

Air compressor solenoid valve function

Solenoid valves are the basic components of automation used to control fluids and belong to experimental devices. Solenoid valves are not limited to hydraulic or pneumatic; solenoid valves for air compressors are usually used in industrial control systems to adjust the direction, flow, speed, on-off and Other parameters.