SBC Linear Guideway SBI65SL-K1-N

08/14/2020

Trouble shooting and correct selection method for thermal expansion valve debugging

As we all know, the thermal expansion valve is one of the four major components in the refrigeration system. It is responsible for reducing the refrigerant from the condensing pressure to the evaporating pressure in the system

09/02/2020

164 technical questions and answers about pumps, just read this one!

1. What is a pump? Answer: The pump is a kind of machinery that converts the mechanical energy of the prime mover into pumping liquid energy.<br></br>

08/16/2020

Two major issues that should be paid attention to when installing and wiring fan coil thermostats

The fan coil unit has a compact structure, sturdiness and durability, and usually adopts high-quality galvanized sheet casing. The condensing surface-mounted air duct water pan is integrally formed by a molding process

08/17/2020

Too high or too low oil pressure of industrial chillers affects normal operation

When using industrial chillers, regular inspection and maintenance work is essential. In the absence of basic maintenance and regular inspections, many industrial chillers are prone to different failures.

06/23/2020

The air conditioner suddenly stopped cooling.

1.The air conditioner remote control may not adjust the temperature. 2. It may be that the air conditioner has not been cleaned for too long, which causes dust to accumulate on the filter net, so that the cold air blocking the air conditioner cannot be blown out. 3. There may be leakage of freon in the air conditioner, resulting in too little freon, and the air conditioner is not cooled. 4. Energy saving is due to unstable voltage, which causes the air conditioner to not be cooled. 5. It may be that the number of air conditioners is insufficient, and the small number of horses is not used for cooling in a large area of the house.

08/12/2020

Method for cleaning and protecting plates of plate heat exchanger

In addition to maintenance under special circumstances, the plate heat exchanger should also be regularly maintained. Due to the convenient disassembly and assembly of the plate heat exchanger and simple maintenance, special tools and equipment are genera¨ﰨ2䀀湠疨

06/29/2020

Several causes of compressor burning

02/27/2021

Debugging method of servo motor

Before wiring, initialize the parameters. On the control card: select the control method; clear the PID parameters; let the default enable signal turn off when the control card is powered on; save this state to ensure that the control card is in this state when it is powered on again.

08/08/2020

Operation steps of temperature shock test chamber refrigeration unit blowdown and leak detection

Operation steps of temperature shock test chamber refrigeration unit blowdown and leak detection The operation steps of temperature shock test chamber refrigeration unit blowdown and leak detection are as follows:

08/24/2020

Is it normal to see smoke from the outdoor unit during air conditioning heating in winter

Is it normal to see smoke from the outdoor unit during air conditioning heating in winter