Too high or too low oil pressure of industrial chillers affects normal operation
When using industrial chillers, regular inspection and maintenance work is essential. In the absence of basic maintenance and regular inspections, many industrial chillers are prone to different failures. If the industrial chillers continue to have minor failures, the cost of using industrial chillers will continue to increase, which will seriously affect the safety of industrial chillers. . Among them, the oil pressure inside the industrial chiller needs to be tested regularly, which plays a very important role in the stable operation of the equipment.
The oil pressure of industrial chillers will directly affect the operating performance of the equipment. In the case of low internal oil pressure in the industrial chiller, as long as the industrial chiller is in operation, the energy consumption of the industrial chiller will continue to increase. In order to better use industrial chillers, companies need to carefully observe whether the oil pressure range of the equipment is normal before maintaining the industrial chillers. If the oil pressure value is normal, continue to complete the maintenance and maintenance of other items. If the oil pressure of the industrial chiller is abnormal, it is necessary to find the main cause of the oil pressure change in time. Only by completing the troubleshooting of the compressor oil pressure can the normal operation of the industrial chiller be ensured.
Here is how to detect oil pressure:
1. When detecting the oil pressure, you first need to observe the oil pressure when the industrial chiller stops running, and then continue the test after the industrial chiller runs for more than 15 minutes. If the oil pressure change range is relatively small, the operating stability of the industrial chiller is very high, otherwise, the oil pressure fault needs to be eliminated in time.
2. By observing the oil pressure changes before and after the equipment is running, it can be judged whether the industrial chiller is faulty. The fewer the faults of the industrial chiller, the lower the cost of operating the industrial chiller, thereby improving the cost-effectiveness of using the industrial chiller.
Excessive high or low oil pressure of industrial chillers will directly affect the stable operation of the equipment. Therefore, when using industrial chillers, companies need to analyze the oil of industrial chillers in time every time they routinely inspect industrial chillers. Whether the pressure is normal. If companies can eliminate compressor high and low pressure faults in time, they can improve the operating efficiency of industrial chillers and reduce the energy consumption of industrial chillers.
When performing regular inspections and maintenance of industrial chillers, in order to reduce the probability of equipment failure, it is necessary for companies to timely count the range of changes in compressor oil pressure. If the oil pressure of the industrial chiller has a relatively large range and needs to be adjusted in time, it can effectively reduce the failure of the industrial chiller with too high or too low oil pressure, and maintain the long-term stable operation of the industrial chiller.
Too high or too low oil pressure of industrial chillers affects normal operation
Recent related posts
-
08/17/2020
Too high or too low oil pressure of industrial chillers affects normal operation
When using industrial chillers, regular inspection and maintenance work is essential. In the absence of basic maintenance and regular inspections, many industrial chillers are prone to different failures.
-
08/17/2020
These 23 air conditioning application tips you should know
Air-conditioning is an indispensable part of the home, especially in the hot summer, it is simply a magic weapon to get rid of the heat. In some areas, there is no heating in winter, or on the eve of heating between autumn and winter, many families also u碌7館2 䀀 締眪湠眷 V V
-
08/17/2020
The specific maintenance content of the cooling tower equipment of the chiller
We know that the international cooling water tower is a structure used for cooling water in power plants, and the general height is determined by the size of the power plant units.
-
08/17/2020
The setting of fire damper in HVAC system
In the HVAC design, there are many types of valves for fire prevention and smoke exhaust, and the valve settings are different for different applications.
-
08/17/2020
The reason for the water seepage at the outlet of the central air conditioner
The spring equinox is over, and the temperature will slowly rise. The hot summer will soon come. Whether it is traditional air conditioning or central air conditioning, it will soon come in handy.
-
08/17/2020
The quality of the cooling medium affects the cooling effect of industrial chillers
After enterprises purchase industrial chillers, when the cooling performance of industrial chillers decreases during operation, many enterprises think that it is related to the failure of industrial chillers.
-
08/17/2020
The most basic maintenance skills for air conditioner failure
1. The most basic maintenance skills for air conditioner failure The air conditioner is composed of a refrigeration system and an electrical system, and its operating state is closely related to the working environment and conditions,
-
08/17/2020
The main difference between the appearance of the evaporator and the condenser
Both the evaporator and the condenser actually have their own advantages, but the principle is actually figured out, so what is the main difference in appearance between the two, I will take you to understand.
-
08/17/2020
The heat pump is prone to frost between +4~-4℃. The symptoms and reasons are not beyond these 10 points.
The air source heat pump can use the low-grade heat energy in the ambient air, so it has the dual advantages of energy saving and environmental protection. However, one of the problems is that
-
08/17/2020
The function and setting of the oil trap in the refrigeration system
In the Fuli Subaru refrigeration and air-conditioning system, when the main engine is higher than the end (evaporator), there is a riser pipe between the evaporator and the main suction pipe,
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
OMRON Relay H3DK-M1
ABB Circuit Breaker 10113544
YEOSHE Piston Pump PV040PA4RM1A0N
SUNS Switch SND6114-SP-C