The SBM07 is a linear guideway model from SBC. Mounting Dimensions: For installation, its height (H) is 8mm, width (W) is 17mm, and length (L) is 22.8mm, which are essential for determining the installation space. The installation - related structural dimensions such as E (1.5mm) and B (12mm) define the spacing and layout of the mounting structure. The specific mounting position dimension J is 8mm, and the mounting tap hole has a thread specification of M2. These dimensions ensure a proper fit and secure installation within relevant equipment. Block Dimensions: The length of the block (L1) is 13.4mm. Other structural dimensions like K (2.5mm), T1 (3.3mm), and the width - related dimensions W1 (6.5mm), W2 (1.6mm), and height H1 (7mm) contribute to the block's stable operation on the rail. There is also a greasing hole with a dimension Q (φ1mm), which is beneficial for maintenance to keep the guideway running smoothly. Rail Dimensions: The width of the rail part (F) is 5mm. The bolt holes on the rail have a diameter (d) of 4.7mm, a depth (h) of 15mm, and a spacing (G) of 2.6mm, which are designed for firmly attaching the rail to the support structure. Maximum Rail Length: The maximum length of the rail (LO) is 490mm, making it suitable for applications that require relatively short - range linear motion. Load - Bearing Capacity: It has a basic dynamic load rating (C) of 0.88kN, indicating its ability to handle dynamic loads during movement. The basic static load rating (Co) is 1.37kN, ensuring stability when the guideway is stationary. In terms of permissible static moment, the longitudinal torque under static load (Mto) is 2.94kN - m, and under dynamic load (Mt) is 2.94kN - m. The transverse torque under static load (MLO) is 4.9kN - m, and under dynamic load (ML) is 0.88kN - m. Mass: The rail has a mass of 0.23kg per meter, which is an important parameter for calculating the overall weight of the linear motion system and assessing its impact on the supporting structure.