SCANCON Encoder 2R100-10-67-S

08/14/2020

Effective means to reduce the resistance of condenser heat transfer system

To ensure that the condenser has a higher heat transfer coefficient, it is necessary to reduce the resistance in the system. There are three ways to achieve this goal.

09/06/2020

Classification of solenoid valves

Direct acting solenoid valve 　　 Introduction: 　　There are two types: normally closed and normally open. The normally closed type is closed when the power is cut off.

07/29/2024

How to Unstick a Reversing Valve on a Heat Pump

A heat pump is a remarkable piece of technology, capable of efficiently heating or cooling a space by transferring heat from one place to another.

08/27/2020

Brief Discussion on Monitoring of Safety Protection Device of Mine Air Compressor

In the process of monitoring and inspecting the safety of air compressors in mining enterprises, the author found that more than 90% of the equipment was not equipped or not fully equipped with the temperature and pressure protection devices that should be configured.

06/29/2020

How the compressor works

08/13/2020

Safety code for cold storage wire installation

During the installation of the cold storage, it is very important whether the wires can ensure the safety of later use. For example, explosion-proof cold storage must use explosion-proof wires in the explosion-proof area

08/13/2024

16 Common Faults and Troubleshooting Methods of Cold Storage Refrigeration Equipment

[Fault analysis] After the refrigerant leaks in the system, the cooling capacity is insufficient, the suction and discharge pressures are low, and a much larger intermittent "squeaking" airflow sound can be heard at the expansion valve than usual.

09/20/2020

BOGE provides energy-saving air compressors

Victor Manufacturing is a leading commercial catering equipment manufacturer. At their manufacturing site in Bradford an extensive range of food service equipment is manufactured which is used by all kinds of organisations such as hotels, restaurants, hospitals and universities to move, store and serve hot and cold foods.

09/08/2020

Brief introduction of compressed air purification equipment applicable industries

Compressed air is the second largest power source after electricity. It is also a process gas source with multiple uses. Its application range covers petroleum, chemical industry, metallurgy, electric power, machinery, light industry, textiles, automobile manufacturing, electronics, and food. ,

03/15/2021

What are the advantages of CDHD2 high-performance servo drive?

What are the characteristics of CDHD2 high-performance servo drive? What are the advantages of CDHD2 high-performance servo drive?