SCHNEEBERGER Linear Guideway BMW55A

04/21/2022

Six Level Measuring Instruments and Relative Merits?

Float level meter is an instrument of measuring liquid level based on buoyancy principle. Usually, the combination of floating ball and scale enables the observer to intuitively read the height of liquid level.

09/10/2020

How does the factory manage the air compressor room

As an important form of energy generation, air compressors are widely used in various industries, and there are many details in their maintenance. The service life of the air compressor can be prolonged after maintenance. Therefore, how to manage the air compressor room also plays a certain role in the maintenance of the air compressor.

07/17/2020

The effect of insufficient refrigerant charge on the chiller

1. If the suction pressure and discharge pressure of the compressor are lower than the normal value, then you need to check to see if it is due to insufficient refrigerant charge.

06/24/2020

Reasons and solutions for refrigerator not cooling

Refrigerator non-refrigeration is a problem often encountered during the use of refrigerators. Refrigerator non-refrigeration always occurs suddenly. A large number of things that need to be refrigerated suddenly become unpredictable, which greatly affects daily life and wastes time to find.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

08/19/2020

Different types of condensers have different layout requirements

There are several types of condensers: vertical, horizontal, spraying and evaporating, which should be arranged according to different types of cold storage. The installation height of the condenser must ensure that its liquid flows into the liquid reservoir under self-flow conditions.

08/16/2020

What are the influencing factors of the cooling speed of the cold storage system

1. The cold storage has a large loss of cold due to poor heat insulation or sealing performance 　　 Poor thermal insulation performance is due to insufficient insulation thickness of pipes, warehouse insulation walls, etc., and poor thermal insulation and thermal insulation effects.

08/20/2020

Strategy丨Common failures and maintenance of piston refrigeration compressors

1. The refrigeration compressor cannot start normally 　　Overhaul ideas 　　 1. Firstly, check whether it is caused by low power supply voltage or poor motor circuit connection.

06/29/2020

Causes of non-condensable gas in refrigeration system

Causes of non-condensable gas in refrigeration system 1. Insufficient emptying of the refrigeration system before charging the refrigerant Before charging the refrigerator, the compressor cylinder in the refrigeration system, the condenser, the evaporator, and the piping of the system were filled with air. In order to eliminate these air before charging the refrigerant, the interior of the refrigeration system Vacuuming,

08/02/2020

What is the four-pipe air conditioner Under what circumstances

Four-pipe air-conditioning means that the air-conditioning box is equipped with cold coils and hot coils at the same time. Each group of coils is fed one time, a total of four, so it is called four-pipe.