Schneider Contactor LC1F225R7

09/08/2020

Series of hazards caused by poor compressed air quality to production

Compressed air is an important source of power in industry. Compressed air is the second largest power source in industry after electricity. Compressed air contains harmful substances such as water, oil, and particulate impurities.

09/05/2020

The most complete air compressor energy saving transformation method

Due to the design standard of the air compressor, the user can only determine the motor capacity according to the maximum demand when selecting the model, resulting in a large margin in the air compressor system.

08/15/2020

Summer chiller failure detection and solutions

The weather is getting hotter and hotter, and the industrial chillers of many factories ushered in the peak period of refrigeration. Frequent operation of refrigeration equipment is likely to have such and other small failures.

08/06/2022

FANUC Spindle Amplifier Alarm Codes and Solutions (4)

The following is a continuation of the previous article, and introduces FANUC spindle drive alarm codes 74-88. Besides, other alarm codes are also introduced.

09/07/2020

Ten points to judge the pros and cons of inverter products!

The technical grade of the frequency converter is gradually developed and formed. With the improvement of use requirements and the development of technology, the quality of the device, the expansion of functions, and the progress of automation technology, it will gradually advance.

08/27/2020

Maintenance method and practice of air compressor electrical equipment

There are many commonly used electrical equipment, such as circuit breakers, contactors, relays, thermal relays, switches, etc., these are hard circuits, in addition to PLC, etc., these equipment is very widely used in air compressors and station rooms, it can be said to be necessity.

07/12/2022

Differences between Single Mechanical Seals and Double Mechanical Seals

Pumps work hard to distribute fluid throughout elaborate systems. As a failsafe against leakage, pumps include one of two parts: packings or mechanical seals.

08/11/2022

What are the Advantages of Synchronous Reluctance Motor?

Permanent magnet synchronous motors have received extensive attention in the motor industry due to their compact structure, high energy density and high efficiency.

06/29/2020

Several causes of compressor burning

08/20/2020

Selection, installation and inspection of solenoid valves in cold storage

When selecting, the solenoid valve diameter of the same size as the pipeline should be configured according to the size of the cold storage refrigeration equipment pipeline.