Schneider power module PLC 140CPS22400C

06/14/2020

The reason for the failure of the multi-line air-conditioning compressor is revealed!

The reason for the failure of the multi-line air-conditioning compressor is revealed! 1 Overview The failure of motor compressor (hereinafter referred to as compressor) can be divided into motor failure and mechanical failure (including crankshaft, co器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ

08/11/2020

Radiator heating system riser pipe installation and precautions

1. Standpipe installation of radiator heating system:<br></br> 1. When arranging the system riser, it should be matched with the use requirements of the building, the heating system diagram, the layout of the radiator, etc.. It is necessary to save pipes and facilitate installation and maintenance.

08/19/2020

Causes and solutions for phase failure of industrial refrigerators

Industrial refrigerators display reverse phase loss failure, which is a common failure of abnormal power supply. The reason for this failure is simple, and it is very convenient to repair, as long as a person with a little electrician basis can solve it easily!

07/31/2020

Key points for safe operation of refrigeration operators in large cold storage

Generally, safe operating procedures should be formulated for the machines and equipment of refrigeration equipment, and refrigeration operators must strictly abide by them to ensure safe production.

08/20/2020

The difference and advantages and disadvantages of air duct machine, water chiller and multi-line

1. Ducting machine-Ducting system 　　 duct type system, as its name implies, uses air as the conveying medium. It uses chillers to centrally produce cold energy, cools/heats the fresh air, mixes it with the return air, and sends it indoors.

11/08/2021

Guide of Siemens Pressure Transmitter: Features, Working Principle and Troubleshooting

Siemens pressure transmitter is a kind of equipment which converts pressure into pneumatic signal or electric signal for control and remote transmission.

08/02/2020

Talk to the manufacturer's engineer and tell you how important refrigeration oil is to refrigeration equipment!

Although the refrigeration oil is only a small material, if you accidentally use inferior products, you can even burn the machine. I believe that many colleagues have often encountered it.

08/11/2020

Which three points should refrigerating machine manufacturers pay attention to when doing air tightness test

After the assembly of each refrigeration unit is completed, a series of tests are required to ensure the safe and stable operation of the unit, and there is an air tightness test. So, what should the refrigerator manufacturer pay attention to when doing the air tightness test?

06/29/2020

How the compressor works

09/08/2020

Introduction of micro heat regeneration adsorption dryer

The non-thermal regeneration suction dryer uses the compressed air pressure change, adsorption under high moisture pressure, and desorption under low moisture pressure to regenerate the adsorbent.