Schneider Sensor XS2N30NB349

09/20/2020

What are mineral oil, semi-synthetic oil and fully synthetic oil What is the difference between them

Mineral oil (MineralLubricant) Mineral oil is a lubricating oil extracted from petroleum. The base oil of mineral oil is the bottom oil left over after the fractional distillation of useful light substances (such as aviation oil, gasoline, etc.) during crude oil refining. Into the product. Essentially, it uses the poorer components of crude oil. Mineral oil is currently the most common type of lubricant on the market.

08/11/2020

What is the difference between the downward air supply and the upper air supply of the precision air conditioner

There are multiple air supply and return modes for precision air conditioners in the computer room, such as upper air supply, lower air supply, upper return air, and lower return air.

08/03/2020

Compressor exhaust overheating is not that complicated, just for these few reasons!

The main reasons for the exhaust temperature overheating are as follows:<br></br> 　　 High return air temperature, large heating capacity of the motor, high compression ratio, high condensation pressure, improper refrigerant selection

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

09/05/2020

The pipeline is not working well, and the compressor is exhausted

Many users have invested a lot of energy and money in the selection, operation and maintenance of compressor equipment, but due to negligence on the compressed air pipeline, a lot of waste has been caused.

08/20/2020

What are the protection devices of industrial chillers

Industrial chiller is a kind of water cooling equipment that can provide constant temperature, constant current and constant pressure cooling equipment. The principle of the chiller is to inject a certain amount of water into the internal water tank of thﰸ2䀀

07/31/2020

Suggestions on safe and intelligent control of air conditioning and ventilation systems during epidemics

Under the epidemic situation, rework is imminent. We have carefully studied the relevant regulations and guidelines newly implemented in the country during the epidemic period, combined with relevant national regulations,

08/24/2020

Normal operating conditions of the refrigeration system in operation

1. The suction temperature of the compressor should be 5-15℃ higher than the evaporation temperature and 5-10℃ higher than the brine temperature;

08/16/2020

How to clean the evaporative condenser chemically

Heat exchanger is an energy-saving equipment that realizes heat transfer between materials between two or more fluids at different temperatures. It transfers heat from a higher fluid to a lower temperature fluid,

02/24/2025

Portable Air Conditioner Common Fault Codes and Troubleshooting Explained

When your portable/mobile air conditioner malfunctions, it may display a certain code on its panel. This code will let you know what problem is occurring in which area of your air conditioning system at this time.