1/1

Shinko Temperature Controller RC-622-SEH

There is no price at present, you can Request a Quote

Simple settings just like an analog controller：Instead of a thunbwheel switch, the UP and DOWN keys are used for each digit settin(up to 100s digit) LED deviation display: Deviation between PV and SV is indicated with lit segment in LED bar. Control action, alarm type selectable with the DIP, Rotary switches: Control actions(PD, ON/OFF action) are selectable with the DIP switch. Alarm types are selected with the Rotary switch from a choice of: No alarm action, High limit alarm with standby, Low limit alarm, Low limit alarm with standbu. High/Low limits alarm.

Ask questions

(0/1,200)

Q: Are there shopping protection plans or extended warranty services?

A: Depending on the category and brand of the product, we may offer shopping protection plans or extended warranty services. You can view relevant information on the product details page and choose to purchase based on your needs.
Q: Are the actual colors of the products consistent with the pictures?

A: We do our best to ensure the accuracy of product images. However, due to variations in display devices and lighting conditions, there may be slight differences in actual colors. We provide detailed color descriptions to assist you in making better choices.
Q: How can I change my email address associated with my account?

A: To change the email address associated with your account, please contact our customer service team and provide them with the necessary verification information. They will assist you in updating your email address.

Question has been sent successfully

Reviews

A

Anonymous user

Nov 25, 2022

Shinko Temperature Controller RC-622-SEH

All was ok! No problems whatsoever.

Helpful

Unhelpful

Shinko Temperature Controller RC-622-SEH

There is no price at present, you can Request a Quote

People who bought this item also viewed

Omega Temperature Controller CN32Pt-304

US$809.23

Danfoss Transmitter 060G1911

US$480.77

AZ Conductivity Meter AZ-8301

US$1625.38

WISE Pressure Gauge P710

US$903.85

Toky Digital Display Controller SV6-DC18W

US$236.92

Customers frequently viewed

IWAYA DENKI Water Pump 25CJT0752

US$2307.69

Panasonic Servo Motor MHMF022L1V2M

US$653.85

Honeywell Solenoid Valve VE4025B1045

US$334.62

ROTEN Mechanical Seal 8E5K-22-X

US$384.62

SANDSUN Overload Pump VA08H-760

US$1568.40

GS Battery 6-QW-60(450)-(55D23L-KR)

US$646.15

Rechi Compressor 44R273A

US$341.00

Bosch Rexroth Linear Guideway Runner Block R165381920

US$107.69

MINDMAN Air Cylinder MCQV2-11-40-200

US$88.46

Mitsubishi Compressor YB645WTG

US$549.00

Copeland Compressor AFE12C4E-IAA-102

Wide Plus Digital Display Controller WP-D403-01-23-HH

NSK Bearing 30330 D

US$851.15

Samsung Compressor SD152H-L1U2

US$245.19

Mitsubishi Servo Motor HG-JR703B

US$7961.54

GUOMAO Reduction Drive Gearbox Speed Reducer GF87-Y15-78

US$2168.75

COSEL Power Supply PMC100E-1

US$741.54

Parker Denison Vane Pump T67DDCS-B42-050-008-4L00-A5M1

Eaton Vickers Vane Pump V10-1S3S-1C20L

US$338.46

SKF Bearing NA 4838

US$346.15

Recent related posts

08/24/2020

You never know why using air conditioners in summer can easily cause fires

Why summer is the season of high incidence of air conditioning fires? Why is it that the air conditioner is properly used, and it will spontaneously ignite after use? This is actually for a reason.

06/20/2020

What are the causes of air conditioning trip

What are the causes of air conditioning trip 1. The contradiction between the rated current of the air conditioner and the current carrying capacity of the wire. 　　Here are two formulas involved: 　　①The rated current of air conditioner I=P÷U ÷power factor, the power remains unchanged, the smaller the voltage, the greater the current required. 　　② The current carrying capacity of the wire I=U÷R, the voltage is proportional to the current. 　　 So when the power supply voltage is normal, we must consider the line voltage drop. The longer the line, the greater the resistance, the greater the voltage drop, and the smaller the output current at the end. However, because the power of the load remains unchanged, the voltage becomes smaller, and the current that needs to be output will be larger. At this time, the wire is forced to overload, and the time will cause heating, and eventually cause the tripping of the open circuit. 　　 Some friends said that the heat of the wire will not cause the tripping of the circuit breaker. In fact, the manufacturer of the air switch has made it clear in the relevant manuals that the heat of the wire will cause the air switch to trip. Because the wire heats up, the crimp terminal will also heat up, and the resistance will become larger and larger. The larger the resistance, the greater the current consumption, and the hotter it will be, a vicious cycle. 　　 2. Leakage 　　During the daily maintenance work, we will encounter the situation that the air circuit trips due to the leakage of electricity. At least I have not experienced it once or twice. Regardless of the leakage of the neutral line or the leakage of the live line, a long time will cause the circuit breaker to trip. 　　Why does the electric leakage cause the MCB to trip? There are two situations. 　　 ① Good grounding. At the beginning, the leakage current was not large, and as time went by, the leakage current became larger and larger, and eventually evolved into a short circuit to ground, unable to close. 　　②There is no ground wire. If the equipment is not connected to the protective ground, when the wire leaks to the equipment, it is equivalent to adding a large shunt resistance. Like this problem, if the air conditioner does not have a ground wire, when the wire leaks to the air conditioner, the air conditioner is a very large shunt resistor and will consume a lot of current. Eventually, the wire will heat up or trip open. 　　How to determine whether the trip caused by the above two aspects can be done with a clamp ammeter. 　　 ① Measure the voltage at the input and output to see if there is a significant change in voltage drop. 　　②Measure whether the output current exceeds the standard. 　　 So my suggestion is: first measure the supply voltage to see if it is within the allowable fluctuation range. Then measure the current to see if it exceeds the rated ampacity of the wire. Finally, check the data one by one according to the measured data to find out the reason.

08/17/2020

The reason for the water seepage at the outlet of the central air conditioner

The spring equinox is over, and the temperature will slowly rise. The hot summer will soon come. Whether it is traditional air conditioning or central air conditioning, it will soon come in handy.

08/16/2020

Factors influencing the evaporation capacity of air-cooled chiller evaporator

Whether it is an air-cooled chiller, an air-cooled screw chiller, or an air-cooled low-temperature chiller, an evaporator is needed. Today we are discussing: What is an evaporator? What are the factors that affect the evaporation capacity of an air-cooled chiller evaporator?

08/15/2020

Reasons for the large difference in cooling of different refrigeration equipment

According to the analysis of the use environment, due to the differences in the cooling methods of the refrigeration equipment, enterprises need to carefully analyze the particularity of the use

06/30/2020

These several compressor failures need our attention

These several compressor failures need our attention In the refrigeration industry, everyone knows that the compressor is the core of the entire ice-making equipment. The quality of a compressor often determines the life of the refrigeration equipment, but no one can guarantee that the entire equipment will not have any problems during use, so It is very helpful for you to know some common faults that occur during the use of the compressor.

08/11/2021

How to Tell if Your Refrigerator Compressor is Bad

The refrigerator malfunction may be caused by the refrigeration system or the electrical system. When judging the compressor fault

05/10/2022

Common Faults and Solutions of Solenoid Valve?

Detection method: First, measure its make-break with a multimeter. If the resistance value approaches zero or infinity, it indicates that the coil is short circuited or open circuited.

07/23/2020

Analysis of Overheating Failure of Refrigeration Compressor

The main reasons for the overheating of exhaust temperature are as follows: high return air temperature, large heating capacity of the motor, high compression ratio, high condensation pressure, and improper refrigerant selection.<br></br> <br></br>

06/14/2020

Trouble analysis and elimination of piston refrigeration compressor

Trouble analysis and elimination of piston refrigeration compressor Trouble analysis and elimination of piston refrigeration compressor 1) Large oil consumption of compressor 　　 Reason: The gap between the bearing, oil ring, cylinder and piston器2䀀ￜ皥䖒皦즠Ʋ嫜ི㲈Ʋ䌁皦ᮔǅ༬皧嫦ིЀ呄ᠾ鹨់༹皧ࠄ00령ꐱ댁珵뛐珵Љ䕄ྦ뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់

Ask questions

Reviews

Shinko Temperature Controller RC-622-SEH

People who bought this item also viewed

Customers frequently viewed

Recent related posts

You never know why using air conditioners in summer can easily cause fires

What are the causes of air conditioning trip

The reason for the water seepage at the outlet of the central air conditioner

Factors influencing the evaporation capacity of air-cooled chiller evaporator

Reasons for the large difference in cooling of different refrigeration equipment

These several compressor failures need our attention

How to Tell if Your Refrigerator Compressor is Bad

Common Faults and Solutions of Solenoid Valve?

Analysis of Overheating Failure of Refrigeration Compressor

Trouble analysis and elimination of piston refrigeration compressor

Welcome to O&Kmarts