The Siemens Circuit Breaker is high quality!
Circuit breaker size S00 for motor protection CLASS 10 A-release0.28...0.4 A
Short-circuit release 5.2 A Spring-type terminal Standardswitching capacity with transverse auxiliary
switch 1 NO+1 NC Phased-out product Successor is SIRIUS 3RV2 Preferredsuccessor type is 3RV2011-0EA25
product brand name SIRIUS
product designation Circuit breaker
design of the product For motor protection
General technical data
product extension auxiliary switch Yes
power loss W for rated value of the current
at AC in hot operating state 5.5 W
at AC in hot operating state per pole 1.8 W
surge voltage resistance rated value 6 kV
protection class IP
on the front IP20
mechanical service life (switching cycles)
of the main contacts typical 100 000
electrical endurance (switching cycles) typical 100 000
installation altitude at height above sea level maximum 2 000 m
ambient temperature
during operation -20 - +60 degrees centigrade
during storage -50 -- +80 degrees centigrade
during transport -50 - +80 degrees centigrade
Main circuit
number of poles for main current circuit 3
adjustable pick-up value current of the current-dependent overload release 0.28 - 0.4
Aoperating voltage
rated value 690 V at AC-3 rated value maximum 690 V
operating current
at AC-3 at 400 V rated value 0.4 A
operating power at AC-3
at 400 V rated value90 W
operating frequency at AC-3 maximum 15 1/h
design of the auxiliary switcht ransverse
number of CO contacts for auxiliary contacts 0
operating current of auxiliary contacts at AC-15
at 24 V 2 A at 230 V 0.5 A
operating current of auxiliary contacts at DC-13
at 24 V 1 A at 60 V 0.15 A
Protective and monitoring functions
product function
ground fault detection No
phase failure detection Yes
trip class CLASS 10
maximum short-circuit current breaking capacity (Icu)
at AC at 240 V rated value 100 kA
at AC at 400 V rated value 100 kA
at AC at 500 V rated value 100 kA
at AC at 690 V rated value 100 kA
Installation mounting dimensions
mounting position any
mounting type screw and snap-on mounting onto 35 mm standard mounting railaccording to DIN EN 50022
height 90 mm width 45 mm depth 81 mm