Siemens Contactor 3TF55

07/31/2020

Apply these 5 parameters to easily determine whether the refrigeration and air conditioning system is operating normally!

Condensing pressure is the pressure at which the refrigerant condenses into liquid in the condenser. Since the pressure inside the condenser in the refrigeration system cannot be measured, in fact, the pressure drop of the refrigerant in the exhaust pipe and the condenser is actually very small.

08/11/2020

Several common causes of compressor bearing damage

There are many important precision parts in first-class compressors, and the most worn part during regular operation is the bearing, so the bearing is one of the parts that need frequent maintenance and replacement.

09/09/2020

What are the criteria for the selection of air compressors

When choosing an air compressor, we actually need to pay attention to some principles, so that we can compare and choose the one that is more suitable for us. Today, the company will give the company that needs an air compressor, etc., let’s talk about what we should pay attention to when choosing an air compressor. matter.

06/29/2020

What is the cause of compressor pipeline vibration

06/14/2020

The difference between air compressor and refrigeration compressor

The air compressor is the same as the refrigeration compressor in that it is the same compressor, the difference is that its working principle and working medium are different.

08/24/2020

8 standard processes for central air conditioning installation!

In terms of home improvement, concealed projects include water and electricity, there is also central air-conditioning, and central air-conditioning has three points of quality and seven points of installation;

09/10/2020

Air compressor installation rules

1.Installation The selection of the installation site is most ignored by the staff. Often after the compressor is purchased, it is randomly located and used immediately after piping. There is no prior planning at all. Little did they know that such a sloppy result would cause future compressor failure and maintenance difficulties and poor compressed air quality.

08/15/2020

Cold storage operation maintenance and management methods

1.Booting and preparation before booting Before starting up, check whether the valves of the unit are in normal starting state, check whether the cooling water source is sufficient, and set the temperature according to the requirements after the power is turned on.

08/17/2020

Installation process of ground source heat pump heat exchanger

If the machine works for a long time, it will get hot, because once the machine works, it will do work, and the work will naturally generate a lot of heat. If this heat is not released in time, it is likely to damage the machine.

01/10/2021

The importance and design application of hotel fresh air system

With people's emphasis on environmental protection and the continuous improvement of air quality requirements, the fresh air system has become a hot word that appears frequently. As a place for people to relax and entertain, the requirements for the decor器2䀀
ￜ皥
䖒皦즠Ʋ㎄ᰙ㲈Ʋ
䌁皦
ᮔDž༬皧㎎ᰙЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥巠皱㙲皦抐皱巠皱੨皦柘皱ￜ皥
ب巠皱㙲皦忈皱੨皦柘皱
즠Ʋǜ勁皦즠ƲبǜV /펔B䌁皦
ᮔDž'鱤džၜ먢䇨珵呈ᠾ뤂ᐱ⿇⬿먲僧ᐱ㥲ᐲ�僬㣢ᐲᠾ
랖僧Ծ識�僬㣢ᐲ臆S㥲ᐲᬄğ識理艏S杴 識杴 㥲ᐲ