SIEMENS Servo Drive 6SN1124-1AA00-0HA3

09/09/2020

Calculation method for determining air consumption of air compressor

The traditional method of determining the compressed air requirements of a new plant is to add up the air consumption (m³/min) of all air-consuming equipment, and then consider adding a safety, leakage and development factor.

09/11/2022

Servo Motor vs Stepper Motor: Comparison from 9 Aspects

Like servo motors, stepper motors are equipped with mechanisms that control the angle of rotation by receiving external signals.

08/25/2020

For an air conditioner with a heating power of 1390W+1050W, what is the power consumption for 1 hour of heating

Time flies, the air conditioner has just been out of service for two months, and it’s time to start using it again. With air-conditioning, our biggest concern is power consumption. After all, everyone is not rich.

07/14/2020

The cause of insufficient compressor displacement

The cause of insufficient compressor displacement Insufficient exhaust volume is one of the faults that compressors are prone to occur. Its appearance is mainly caused by the following reasons: 1. The failure of the intake filter: clogged fouling,

08/07/2024

Car AC System: Main Components Explained

The air conditioning system is a closed-loop working system, mainly composed of compressors, condensers, expansion valves, evaporators and other components.

01/15/2021

How to clean the air conditioner

Cleaning the external unit of the air conditioner is conducive to improving the operating efficiency of the air conditioner and extending the service life. How to clean the air conditioner external machine, what problems should be paid attention to when c器2䀀
ￜ皥
䖒皦즠Ʋ奌ི㲈Ʋ
䌁皦

07/20/2020

For the failure of the constant temperature and humidity test chamber, the early inspection is very important

For the failure of the constant temperature and humidity test chamber, the early inspection is very important What should I do if there is an abnormality in the constant temperature and humidity test chamber, can we only wait for the after-sales personnel to come to check? Of course not. Only if the user has mastered some basic troubleshooting techniques, then he can solve it by himself and save his time.

08/11/2020

Installation conditions and precautions of refrigeration compressors

The selection of the installation site is most ignored by the staff. Often after the compressor is purchased, you can find a location and use it immediately after piping. There is no prior planning at all.

08/15/2020

Simple treatment method after the refrigeration system enters water

Since the chiller has a water system, there is a possibility that the refrigerant system may enter water when it is used improperly. Therefore, a process guide is formulated for the problem of water ingress

06/29/2020

What is the cause of compressor pipeline vibration