TAIE Temperature Controller FY400-202000T

08/14/2020

Introduction to the three most common classification methods of refrigeration compressors

The evaporation temperature of the single-stage refrigeration compressor is in the range of -45~10℃. Divided by evaporation temperature:

03/03/2021

Control mode of servo motor

Torque control: the torque control mode is to set the external output torque of the motor shaft through the input of external analog quantity or the assignment of direct address. For example, if 10V corresponds to 5nm, when the external analog quantity is set to 5V, the output of the motor shaft is 2.5nm: if the load of the motor shaft is lower than 2.5nm, the motor will rotate forward, and when the external load is equal to 2.5nm

12/31/2021

Air Conditioner Refrigerant Leakage & Solutions

An air conditioning refrigeration system is composed of a compressor, condenser, throttling valve, evaporator, and connecting copper pipe and many other parts and accessories.

04/21/2022

Six Level Measuring Instruments and Relative Merits?

Float level meter is an instrument of measuring liquid level based on buoyancy principle. Usually, the combination of floating ball and scale enables the observer to intuitively read the height of liquid level.

07/15/2020

ZP54KUE-TF574.5 HP 60Hz (R410A) air conditioning operating conditions Emerson Copeland compressor

Today I want to introduce the Emerson Copeland compressor ZP54KUE-TF5/7, which is suitable for R410A refrigerant at 60Hz three-phase electric air conditioning. The power given in the manual of Emerson Copeland Scroll Air Conditioner Compressor is 4.5 hp.

08/03/2020

Branch tube PK branch box in multi-connection applications, who is better

At present, the main connection methods used in the mainstream market of home improvement central air-conditioning are branch boxes and branch pipes.

06/29/2020

Compression ratio of American Copeland compressor

03/08/2021

AC servo driver wiring precautions

For signal line and encoder input line, please use shielded wire. Wiring length: the length of signal line from NC to AC servo driver is less than 3m, and the length of input line from AC driver to encoder is less than 20m. The ground wire should be thick wire as far as possible. According to the third grounding standard (grounding resistance < 100 Ω), one point grounding method should be adopted to connect the ground wire. If the motor and the machine tool are insulated, the motor should be grounded.

08/03/2020

What is the difference between an air source heat pump and a heating and cooling air conditioner

According to statistics, in 2017, a total of 5.78 million households were converted from coal to electricity and gas, and 3.94 million households were completed in 28 cities in Beijing-Tianjin-Hebei and surrounding areas.

09/07/2020

The essentials of air compressor selection

When buying an air compressor, in addition to the purchase cost, how to reduce electricity expenses? How to extend the service life of the air compressor? How to provide air pressure smoothly?