TAKEX Sensor GLT505J

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

03/11/2021

The main circuit fuse fusing is a common fault of SCR servo driver. The causes of fuse fusing are as follows

The "phase sequence" of power incoming line is incorrect. Due to the synchronization problem between the trigger pulse and the main circuit of SCR servo driver, there are strict requirements on the "phase sequence" of the input power supply. If the "phase sequence" is not correct, connecting the power supply may immediately cause the fuse of the main circuit of the driver to blow.

07/08/2024

Water Solenoid Valves: Common Faults, Solutions, ＆ Precautions

solenoid water valve is a valve that allows or restricts the water flow by controlling the operation of an electromagnet. It is usually divided into two types: direct acting and indirect acting.

01/15/2021

The working environment of the air conditioner and the refrigerator freezer is different

The working environment of the air conditioner and the refrigerator freezer is different, which causes inconsistency in the variety of refrigerant used, and also affects the structure of the compressor.

03/12/2021

Four control modes of servo drive

1.Feedback compensation open loop control. The accuracy of open-loop system is low, because the step error , start stop error and mechanical system error of servo driver will directly affect the positioning accuracy. This system has the advantages of both open-loop and closed-loop, that is, it has the stability of open-loop and the accuracy of closed-loop.

06/14/2020

Embraco hosts flammables webinar

BRAZIL: Compressor manufacturer Embraco will host two free educational webinars in June, one covering refrigeration fundamentals, the other on the use of flammable “natural” refrigerants in commercial refrigeration.

08/18/2020

Solution to water leakage of fan coil ceiling

The fan-coil system is supplied with chilled water by the chiller, and the water temperature is usually only about 8°C. Therefore, the chilled water supply and return pipes, condenser pipes and condensate trays are all relatively low in temperature.

10/24/2025

Common Faults of Cold Storage (with a List of Fault Repair Methods)

Cold storage is an indispensable and important facility in many industries. They play a key role in storing and preserving various products. However, even with the most sophisticated systems, cold storage can suffer from various failures.

09/11/2020

Air compressor winter maintenance

In winter, when the temperature drops and the air compressor is not used properly or maintained in time, some quality accidents often occur, causing great economic losses and potential safety hazards. Now make some analysis on some precautions and maintenance methods of the winter air compressor.

08/02/2020

Equipment selection for cold storage design and installation temperature and size are critical

The equipment selection of the cold storage design and installation is related to the actual operation of the cold storage after the completion of the cold storage.