TAKEX Sensor PF-TL3S

04/25/2025

Cooling Tower Troubleshooting and Solutions

Cooling towers are commonly used equipment in industry, air conditioning and other fields, and are used to remove the large amounts of heat generated during the production process.

08/24/2020

Precautions for cold storage installation

Library refers to the use of artificial means to create an environment different from outdoor temperature or humidity. Pay attention to the following points when installing cold storage:

06/25/2022

6 Common Faults of Encoder?

If motion control is important to your production, then your encoder is one of the keys to your success. Encoders are exposed to shock, contaminants/oil, excess vibration, moisture

08/11/2020

Treatment method for water leakage of central air conditioner

The reason for the dripping of the central air conditioner-improper installation of the body<br></br> The first thing we need to see is whether the installation of the machine body is standard, and the installation is not in place.

05/03/2022

Differences Between AC Contactor and DC Contactor?

The working principle of DC contactor is similar to that of AC contactor. They all make the main contact on or off through the actuation of electromagnetic coil.

08/11/2020

Correct adjustment method of opening degree of thermal expansion valve

The expansion valve is one of the four major components of the refrigeration system. It is an important device for regulating and controlling the flow and pressure of the refrigerant entering the evaporator, and it is also the "boundary line" between the high and low pressure sides.

08/20/2020

Installation and placement conditions of cooling tower of thermal shock tester

Let's learn about the installation and placement conditions of the cooling tower of the thermal shock tester with the editor of okmarts.com! 1. The ground is flat and well ventilated;

09/09/2020

Mechanical equipment inspection management

Air compressors are the most used power resource in the 21st century, and are basically needed in all walks of life. Therefore, the normal operation of air compressors is the key to protecting the interests of users. For this reason, equipment inspection is extremely important.

06/29/2020

Several causes of compressor burning

09/01/2020

The most complete version｜Basic theoretical knowledge of compressed air (2)

Six, compression and compression ratio 　　1, compression 　　 Adiabatic compression is a compression process in which gas heat is not significantly transferred or transferred during the compression process.