Tecumseh Compressor AE4430Z-AA1A

08/07/2020

Don't let the air conditioner "false malfunction" fool you

in winter, the utilization rate of air conditioners soars. On the other hand, okmarts.com, a service network owned by O&K, sometimes receives calls from citizens saying that the air conditioner at home is broken.

08/14/2020

Effective means to reduce the resistance of condenser heat transfer system

To ensure that the condenser has a higher heat transfer coefficient, it is necessary to reduce the resistance in the system. There are three ways to achieve this goal.

09/16/2020

Application skills of air compressor using oil and gas separator

Abstract: The application technical requirements of the oil-gas separation core used in air compressors, and the problems that occur during the use of the oil-gas separation core are analyzed, and the matters to be noted before installation.

08/15/2020

What should I do if the cold storage is moldy How to physically remove mildew

Mold generally grows in dark and humid places and can adapt to lower temperatures. Usually in high temperature storage, the situation is serious. Mold grows in the cold storage, and the spores will fly everywhere, which will contaminate the goods and products stored in the storage.

03/08/2023

The Differences of Double Acting Cylinder and Single Acting Cylinder

the single acting cylinder acts on one end of the piston, while the double acting cylinder acts as one end of the piston.

06/29/2020

How the compressor works

08/29/2023

Heat Pump vs Central Air: Which One is Right for You?

When it comes to cooling your home, you have two main options: a heat pump or a central air conditioner. Both systems work to remove heat from your home and circulate cool air throughout, but they operate in different ways.

08/08/2020

Maintenance knowledge and failure methods of small combined cold storage

1. The cold storage door is not closed tightly. Please adjust the distance between the hinge and lock on the door and the storage body.

06/12/2024

Solenoid Valves: Common Faults and Solutions

The solenoid valve is an industrial pneumatic component that we often use.

09/10/2020

Air compressor installation rules

1.Installation The selection of the installation site is most ignored by the staff. Often after the compressor is purchased, it is randomly located and used immediately after piping. There is no prior planning at all. Little did they know that such a sloppy result would cause future compressor failure and maintenance difficulties and poor compressed air quality.