TEND Switch TFS-304

01/24/2022

Factors to Consider When Selecting a Pressure Transmitter with the Diaphragm Seal System

The transmitter with a diaphragm seal system is composed of a diaphragm seal system, the capillary and filling liquid.

09/04/2020

Have you heard of the 6S management of the compressor station on-site

For compressor users, on-site management is one of the daily management content of each enterprise.

08/17/2020

Tubular heat exchanger tube bundle failure and flange leakage

1. Tube bundle failure 　　 1. Corrosion and abrasion of the tube bundle cause tube bundle leakage or scale in the tube bundle causes blockage and malfunction

09/07/2020

The importance of air compressor to laser cutting machine

The laser cutting machine is already a relatively common machining equipment in the metal processing industry. When many people buy a laser cutting machine, they don’t know that the operation of the laser cutting machine actually requires a lot of auxiliary equipment to complete the processing.

09/10/2020

Which instruments should the compressor check regularly

Regular inspection of the compressor is to determine the quality of the compressor. In addition to the measuring instruments used daily, the following instruments must also be used:

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

02/17/2023

Installation and Maintenance of Gearboxes

When you select gearbox model, four factors should be given comprehensive consideration.

08/14/2020

What should I do if the refrigerator trips and leaks

Leakage of the moisture-proof wire of the freezer The leakage of the moisture-proof wire of the freezer is mainly manifested by the frequent on and off of the overload protection relay that is turned on after the power is turned on

03/01/2021

Performance characteristics of Panasonic Minas series Panasonic AC servo

The output power of Panasonic AC servo motor is generally 0.1-100 W, and the power frequency is divided into 50 Hz, 400 Hz, etc. It is widely used in various automatic control and recording systems 1.Miniaturization design 1) Through the best thermal analysis of the driver, the miniaturization is realized. Compared with the past, the volume is 75% and the weight is 80% 2) The new punching process of thin die steel plate has greatly reduced the iron loss, shortened the motor length (70% in the past) and reduced the number of drive models. It adopts current grading method to prepare and maintain. One driver is suitable for multiple motors and can identify automatically.

07/12/2020

"Fire Eyes Gold Eyes" Training Guide: Genuine Danfoss Compressor

The current Danfoss compressor nameplate?