TEZUO Switch AZX8108

06/20/2020

How good is the air conditioning dehumidification

Nowadays, the temperature of some air conditioners is set actively by the manufacturer during dehumidification. Under the dehumidification method of this type of air conditioner, the control circuit will first check the room temperature, and then set the operating temperature policy value. The setting value of the factory plan is usually the policy value of the operation arrival It is 2 degrees lower than the room temperature. If the setting is too high, the dehumidification effect is not significant. In order to prevent overheating and lowering the room temperature during dehumidification, this set value is usually judged. At this time, we do not need to set the temperature, just open the air conditioning dehumidification function.<img src="{{media url=&quot;How_good_is_the_air_conditioning_dehumidification.jpg&quot;}}" alt="" />

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

08/19/2020

Different types of condensers have different layout requirements

There are several types of condensers: vertical, horizontal, spraying and evaporating, which should be arranged according to different types of cold storage. The installation height of the condenser must ensure that its liquid flows into the liquid reservoir under self-flow conditions.

07/30/2020

11 common problems with refrigeration compressors, do you know these?

Impurities entering the friction surface of the moving parts of the compressor pump body will cause abnormal scratches and wear. Impurities entering the solenoid valve, expansion valve, control valve, capillary tube and stop valve in the refrigerator system will block the valve hole or make the valve close tightly. And fail.

07/27/2022

Working Principle of a Vane Pump

During a rotation cycle, the volume between adjacent vanes changes because of the rotor’s eccentric mounting position.

06/14/2020

Comparison of semiconductor refrigeration technology and compressor refrigeration technology

Comparison of semiconductor refrigeration technology and compressor refrigeration technology The mechanical compression refrigeration system includes a compressor, a condenser, a filter, a solenoid valve, an expansion valve, an evaporator, a liquid reserﰸ2䀀
ￜ皥
䖒皦즠Ʋ娼ི㲈Ʋ
䌁皦隆
ᮔDž༬皧婆ིЀ呄ᠾ鹨់༹皧

06/14/2020

The weather turns hot Avoid the risk of epidemic spread due to the use of air conditioning

The weather turns hot: Avoid the risk of epidemic spread due to the use of air conditioning According to the press conference of the 108th New Coronary Pneumonia Epidemic Prevention and Control in Beijing on May 18, 2020, 33 patients with concentrated feﰸ2䀀
ￜ皥
䖒皦즠Ʋ娼ི㲈Ʋ
䌁皦隆
ᮔDž༬皧婆ིЀ呄ᠾ鹨់༹皧
ࠄ
00븹먱댁珵理

09/01/2020

Analysis of heat recovery of oil-free air compressor

1.The working principle of oil-free air compressor cooling The air enters the first-stage low-pressure rotor pressurization and intercooler cooling through the filter, and then enters the second-stage high-pressure rotor pressurization and aftercooler

08/17/2020

Causes and treatment of cracks at the inlet of the cooler

The crack at the inlet and outlet of the cooler is a kind of brittle crack, which is generally manifested as a crack at the tip of the toothed plate, and then cracks along the intergranular.

11/13/2021

Basics of Industrial Control System and the Use of PLC

The components of industrial control system (ICS) can be roughly divided into two categories according to their location: control center equipment and remote site equipment.