TIMKEN Bearing 33114

07/25/2020

The 9 types of compressor failure and hazard analysis are all in it! ! !

Start with liquid is a problem that easily occurs during shutdown. In the shutdown state, the refrigerant will migrate from the system back to the compressor and be deposited in the lubricating oil.

06/29/2020

Compression ratio of American Copeland compressor

06/30/2022

What is Check Valve

Check valves are found in almost every industrial application acting as one-way or non-return valves.

09/14/2020

Application of synthetic compressor oil

At present, synthetic lubricants are widely used in the compressor field. Among them, oil-injected and oil-immersed rotary screw air compressors and large reciprocating compressors are one of the most used markets.

09/21/2020

How to determine and calculate gas consumption

The traditional method of determining the compressed air requirements of a new plant is to add up the air consumption (m3/min) of all air-consuming equipment, and then consider adding a safety, leakage and development factor

07/18/2020

Process and cause of liquid shock in piston refrigeration compressor

1. Introduction The phenomenon that liquid refrigerant and/or lubricating oil damage the suction valve plate when the gas is sucked into the cylinder of the compressor, and it is produced when the piston is compressed when the piston is close to the top dead center and is not quickly discharged during the exhaust process after entering the cylinder.

08/20/2020

What should I do if the condenser tube of the high and low temperature test chamber is abnormally hot

What should I do if the condenser tube of the high and low temperature test chamber is abnormally hot? Today, the editor of okmarts.com will tell you the reason and troubleshooting method!

07/06/2020

Air Compressor Market product type, technology, lubrication, application, key Players and region Analysis

The dramatic spread of COVID-19 has created a marginal impact on the global air compressor market. The sustainability of the air compressor market is mainly attributed to the significantly increasing demand from various industries such as oil & gas, healthcare, chemical manufacturing, and many others. In addition, it is expected that the demand for the air compressor will be ultimately restored after the outbreak of COVID-19.

08/17/2020

16 important factors that must be considered for cold storage installation

When installing the cold storage, the most important thing is to be able to do our most basic things well, and to be able to put ourselves in the position for the sake of our customers. So what exactly do cold storage installations do? Let's take a look!

08/18/2020

Eight aspects allow the chiller to achieve energy saving in management

How does the chiller achieve energy saving in management, so that enterprises can save costs. In fact, there are many solutions, in addition to operation, and then in management. The following editor will give you a detailed introduction.