Trane Sensor X13790362-08

09/11/2025

What is a servo motor?

1.Servo motor refers to the engine that controls the operation of mechanical components in the servo system, and is an auxiliary motor indirect transmission.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

04/22/2025

The difference between chilled water, cooling water and condensed water and the principle of refrigeration

The central air-conditioning host is composed of a compressor, an evaporator, a condenser, and a throttle valve. The compressor provides energy. The condenser reduces the temperature of the refrigerant from the compressor.

07/31/2020

Precautions for showcase

After the cabinet is transported, it must be placed securely and stand still for half an hour before it can be powered on. When using the supermarket display cabinet for the first time

08/19/2020

The importance of industrial chiller sealing and the hazards of entering air

During the use of industrial chillers, there are many factors that will cause the equipment to deteriorate. At this time, it is necessary for the enterprise to find the cause and solve it.

07/20/2020

Performance index of electronic expansion valve:

Advantages of electronic expansion valve: The energy efficiency ratio is improved during high-frequency and low-frequency operation; the reliability of the compressor is improved, and the conditions of oil return, l

06/20/2020

The main reason for the slow heating of air conditioners

There are several reasons for the slow heating of air conditioners: 　　 The dirt of the transpiration device and the condenser is too thick, which will cause air flow blockage, affect the heat declaration, and make the air conditioning heating a big discount. The filter is not cleaned for a long time<img src="{{media url=&quot;The_main_reason_for_the_slow_heating_of_air_conditioners.jpg&quot;}}" alt="" />

07/22/2022

How to Prime a Water Pump

Water pumps will run out of pressure and stop working if turned off for an extended period of time, such as over the winter.

09/22/2025

Basics of Encoder and Orthogonal Coding

Encoder is a kind of electromechanical equipment, which can be used to measure the movement of machinery or the target position of machinery.

06/30/2020

Correct handling method of single compressor

Correct handling method of single compressor The handling of a single compressor is very particular and has strict requirements, that is to say, it is not how you want to move it.