VICKERS Filter V6021V1C20

08/20/2020

What to do when the industrial chiller encounters a water cut

All kinds of failures can be encountered in long-term use of industrial chillers. For industrial chillers, if there is a water cut problem, it is very dangerous and must be dealt with in a timely and effective manner.

08/24/2020

Why is the opportunity of low-temperature industrial cold water slow

When it comes to low-temperature industrial chiller equipment, many of my friends may know that low-temperature industrial chiller products are a type of professional refrigeration equipment widely used in domestic industrial production.

01/05/2023

Tips for Solenoid Coil Winding

The solenoid coil is a device that uses the principle of electromagnetic induction to work. When a current flows through a wire, a certain electromagnetic field is generated around the wire. It is regularly wound.

11/04/2022

6 Common Electric Motor Failures and Solutions

Electric motors are widely applied in production, transmission, and distribution. But failures could occur due to wrong operation, insufficient maintenance, etc

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

08/11/2020

Why does your refrigeration unit consume so much power

1. Operation management of refrigeration equipment<br></br> The amount of cold produced by refrigeration equipment is directly related to the operating conditions of the system. For the same compressor with the same structure, speed, and type of refrigerant, due to changes in operating conditions and different operation management,

11/10/2022

3 Common Expansion Valve Failures and the Solutions

The most common failures in the use of expansion valves are valve blockage, frosting, ice blockage and oil blockage.

09/07/2020

Eight advantages of air compressor waste heat recovery device

During the operation of the air compressor, about 80% of the input electric energy will become heat, and the remaining 20% ​​will eventually become compressed air energy. After the electric energy consumed by the compressor is converted into heat in the working process, most of it is taken away by the compressed special mixture

08/22/2022

Some Common Questions about Motor Torque

Motor torque is simply the amount of force used to turn a motor.

07/20/2020

Six aspects of repair and maintenance of refrigeration compressors in cold storage

A. During the initial operation of the cold storage unit, carefully observe the oil return of the compressor and keep it clean. If you find that the oil level is not clean enough or if the oil level drops, you should add oil or replace it with new oil in time. This can avoid poor lubrication