Weidmuller Power Supply CP DC UPS 24V 40A 1370040010

Product Details

ConnectPower Series

Professional range of Weidmuller buffers from the ConnectPower series. In the event of a power shortage, the buffers take over the power supplies in the range from 250ms to 1s in automation systems. The energy is stored in the internal capacitors making them maintenance free. The buffers incorporate an LED display to show the respective state of the buffer.

Reliable
Efficient
Robust

Switch Mode - Weidmuller

 

General ordering data

Type	CP DC UPS 24V 40A
Order No.	1370040010
Version	UPS control unit
GTIN (EAN)	4050118202342
Qty.	1 pc(s).
Availability	Delivery date on request

Dimensions and weights

Width	66 mm
Width (inches)	2.598 inch
Height	130 mm
Height (inches)	5.118 inch
Depth	150 mm
Depth (inches)	5.905 inch
Net weight	1,051.8 g

Temperatures

Humidity	5...95 %, no condensation
Operating temperature, max.	70 °C
Operating temperature, min.	-25 °C
Storage temperature, max.	85 °C
Storage temperature, min.	-40 °C
Operating temperature	-25 °C...70 °C
Storage temperature	-40 °C...85 °C

Environmental Product Compliance

REACH SVHC

Lead 7439-92-1

Battery module

Parallel connection option	Yes, max. 2
Rated voltage	24 V
Storage medium	3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch

Integrated battery charger

Battery availability test	every minute
Charging current	0.15 CA
Charging feature	IU characteristic curve
Charging voltage (temperature compensated)	27, 48 V @ 20°C
Temperature coefficient	- 48 mV / °C

Operating interfaces and control inputs

DIP switch	Inversion of transistor outputs, Operation without temperature probe
Remote disconnection (Interlock)	Yes
Selector switch battery	3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, No Battery, Service
Selector switch buffer times	0.5 min, 1 min, 3 min, 5 min, 10 min, 20 min, 30 min, 45 min, ∞, ∞ w/0
Temperature probe	NTC 100 kΩ

Input

DC current consumption	max. 200 mA (without battery), max. 0.5 A (with fully charged battery)
DC input voltage range	20...30 V DC
Input current	≤ 43 A
Input fuse (internal)	Yes
Max. approved input current	52 A
Wire connection method	Screw connection

Output

Continous output current @ UNominal	48 A @ 45 °C, 24 A @ 70 °C, 40 A @ 60 °C
Nominal output current for Unom	40 A @ 60 °C
Output current, max.	48 A
Output voltage	Vo = Vin - 0.2 V normal operation (Imax), Vo = Vin - 0.3 V battery supply (I max)
Overload protection	Yes
Parallel connection option	Yes, max. 2, Yes, with diode module
Protection against inverse voltage	Yes
Rated output voltage	24 V DC ± 1 %
Reserve capacity @ UNominal	48 A for 1 min, ED = 5 %
Residual ripple, breaking spikes	< 50 mVPP @ 24 V DC, IN
Temperature coefficient	- 48 mV / °C
Temperature probe	NTC 100 kΩ
Wire connection method	Screw connection

General data

Buffer times	Depending on the connected battery
Clip-in foot	metal
Current limiting	> 120% IN
Degree of efficiency	≥ 96% normal mode, battery is being charged, ≥ 98% normal mode, battery is charged, ≥ 98% buffer mode
Housing version	Metal, corrosion resistant
Humidity	5...95 %, no condensation
MTBF	> 500,000 h in accordance with IEC 61709 (SN29500)
Mounting position, installation notice	Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.
Operating temperature	-25 °C...70 °C
Power loss	< 10 W
Protection against reverse voltages from the load	32…34 V DC
Protection degree	IP20
Short-circuit protection	Yes
Storage medium	3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch
Surge voltage category	III

EMC/shock/vibration

Noise emission in accordance with EN55032	Class B
Vibration resistance IEC 60068-2-6	2.3 g
Interference immunity test acc. to	EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)|EN 61000-4-11 (dips)
Shock resistance IEC 60068-2-27	30 g in all directions

Insulation coordination

Insulation voltage	1 kV DC
Pollution severity	2
Protection class	III, with no ground connection, for SELV
Surge voltage category	III
electrical isolation, input-earth	1 kV
electrical isolation, output-earth	1 kV

Electrical safety(applied standards)

Electrical machine equipment	Acc. to EN60204
For use with electronic equipment	Acc. to EN50178 / VDE0160
Protection against dangerous shock currents	Acc. to VDE0106-101
Protective separation / protection against electrical shock	VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage	SELV according to EN 60950, PELV according to EN 60204
Safety transformers for switch-mode power supplies	According to EN 61558-2-16

Connection data(input)

Conductor cross-section, AWG/kcmil , max.	6
Conductor cross-section, AWG/kcmil , min.	26
Conductor cross-section, flexible , min.	0.5 mm²
Conductor cross-section, rigid , max.	16 mm²
Conductor cross-section, rigid , min.	0.5 mm²
Reverse polarity protection	Yes
Tightening torque, max.	1.5 Nm
Tightening torque, min.	1.2 Nm
Wire connection cross section, flexible (input), max.

Connection data(output)

Conductor cross-section, AWG/kcmil , max.	6
Conductor cross-section, AWG/kcmil , min.	26
Conductor cross-section, flexible , max.	16 mm²
Conductor cross-section, flexible , min.	0.5 mm²
Conductor cross-section, rigid , max.	16 mm²
Conductor cross-section, rigid , min.	0.6 mm²
Tightening torque, max.	1.5 Nm
Tightening torque, min.	1.2 Nm

Connection data(signal)

Wire connection cross-section, flexible (signal), max.	16 mm²
Wire connection cross-section, flexible (signal), min.	0.5 mm²
Wire connection method	Screw connection
Wire cross-section, AWG/kcmil , max.	12
Wire cross-section, AWG/kcmil , min.	26
Wire cross-section, solid , max.	16 mm²
Wire cross-section, solid , min.	0.5 mm²

Signaling

Floating contact	Yes
Status indicator	Three-colour LED: Battery capacity >85% green, >40% yellow, >20% red, <20% red (Flashing), Green/yellow LED: normal / buffering, Yellow/red LED: temperature alarm / alarm, Yellow/red LED: switch-off / battery fault
Status relay (max. load)	Fault (alarm) (30 V AC/DC 0.1 A), Battery operation (buff.) (30 V AC/DC 0.1 A), Laden (Charg.) (30V AC/DC 0,1A)

 

DATA SHEET

Connect Power

CP DC UPS 24V 40A

 

The UPS control unit together with the associated battery module and the power supply unit form a complete DC UPS system. In normal operation, the input voltage from the UPS control unit is connected directly to the load. In the event of a mains failure (drop of the DC input voltage) the system switches instantly to battery operation.

Once the mains supply has been restored, the system switches back to normal operation and the battery is fully recharged by the integrated charger.

Three relay outputs, as well as three additional active transistor outputs and a control input to lock battery operation, provide full remote control by means of SPS or DCS control. Numerous modes of operation and an easy- to-use status display provide rapid fault diagnosis and optimum customisation to the application.

 

General ordering data

Type     CP DC UPS 24V 40A  

Order No. 1370040010

Version     UPS control unit

GTIN (EAN) 4050118202342

Qty.     1 pc(s).

 

Technical data

Dimensions and weights

Width: 66 mm              Width (inches):2.598 inch

Height:130 mm              Height (inches):5.118 inch  

Depth:150 mm              Depth (inches):5.905 inch  

Net weight:1,051.8 g

Temperatures

 

Humidity:5...95 %, no condensation    

Operating temperature, max.:70 °C

Operating temperature, min.:-25 °C

Storage temperature, max.: 85 °C                         

Storage temperature, min.: -40 °C

Operating temperature : -25 °C...70 °C             

Storage temperature: -40 °C...85 °C

Environmental Product Compliance

REACH SVHC: Lead 7439-92-1

Battery module

Parallel connection option:Yes, max. 2

Rated voltage: 24 V

Storage medium:3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch

Integrated battery charger

Battery availability test:every minute

Charging current 0.15 CA

Charging feature:IU characteristic curve

Temperature coefficient:- 48 mV / °C

Charging voltage (temperature compensated): 27, 48 V @ 20°C

 

Operating interfaces and control inputs

DIP switch:Inversion of transistor outputs, Operation without temperature probe

Selector switch battery:3.4 Ah, 7.2 Ah, 12 Ah, 17Ah, No Battery, Service

Temperature probe:NTC 100 kΩ

Remote disconnection (Interlock):Yes  

Selector switch buffer times: 0.5 min, 1 min, 3 min, 5min, 10 min, 20 min, 30min, 45 min, ∞, ∞ w/0

Input

DC current consumption:max. 200 mA (without battery), max. 0.5 A (with

  fully charged battery)

DC input voltage range: 20...30 V DC

Input current: ≤ 43 A

Input fuse (internal):Yes  

Max. approved input current:52 A

Wire connection method:Screw connection

Output

 

 

Continous output current @ UNominal: 48 A @ 45 °C, 24 A @ 70°C, 40 A @ 60 °C

Output current, max.: 48 A

Overload protection:Yes

Nominal output current for Unom:40 A @ 60 °C

Output voltage:Vo = Vin - 0.2 V normal operation (Imax), Vo = Vin- 0.3 V battery supply (Imax)

Parallel connection option:Yes, max. 2, Yes, with diode module

Protection against inverse voltage :Yes

Rated output voltage:24 V DC ± 1 %  

Reserve capacity @ UNominal:48 A for 1 min, ED = 5 %    

Residual ripple, breaking spikes:< 50 mVPP @ 24 V DC, IN

Temperature coefficient:- 48 mV / °C

Temperature probe:NTC 100 kΩ  

Wire connection method:Screw connection

General data

Buffer times: Depending on the connected battery

Current limiting:> 120% IN

Clip-in foot:metal

Degree of efficiency:≥ 96% normal mode, battery is being charged, ≥ 98% normal mode, battery is charged, ≥ 98% buffer mode

Housing version:Metal, corrosion resistant

Humidity: 5...95 %, no condensation

MTBF:> 500,000 h in accordance with IEC61709 (SN29500)

Mounting position, installation notice:Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.

Operating temperature: -25 °C...70 °C

Power loss:< 10 W

Protection against reverse voltages from the load: 32…34 V DC

Short-circuit protection:Yes  

Surge voltage category :III

Protection degree:IP20

Storage medium:3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch

EMC / shock / vibration

Noise emission in accordance with:  EN55032 Class B

Interference immunity test acc. To:  

EN 61000-4-2 (ESD)|

EN 61000-4-3 and EN

61000-4-8 (fields)|EN

61000-4-4 (burst)|EN

61000-4-5 (surge)|EN

61000-4-6 (conducted)|

EN 61000-4-11 (dips)

 

Vibration resistance IEC 60068-2-6:  2.3 g

Shock resistance IEC 60068-2-27:   30 g in all directions

 

Insulation coordination

Insulation voltage : 1 kV DC

Pollution severity: 2

Protection class:III, with no ground connection, for SELV

Surge voltage category:III

electrical isolation, input-earth:1 kV

electrical isolation, output-earth:1 kV

 

Electrical safety (applied standards)

Electrical machine equipment:Acc. to EN60204

For use with electronic equipment:Acc. to EN50178 /VDE0160

Protection against dangerous shock currents:Acc. To VDE0106-101

Protective separation / protection against electrical shock:VDE0100-410/ACC. to DIN57100-410

Safety extra-low voltage:SELV according to EN 60950, PELV according to EN 60204

Safety transformers for switch-mode power supplies:According to EN 61558-2-16

 

 

 

Connection data (input)

Conductor cross-section, AWG/kcmil ,max.: 6

Conductor cross-section, AWG/kcmil ,min. :26

Conductor cross-section, flexible , min. 0.5 mm²

Conductor cross-section, rigid , max.  :16 mm²  

Conductor cross-section, rigid , min. : 0.5 mm²

Reverse polarity protection :Yes  

Tightening torque, max.:1.5 Nm

Tightening torque, min.: 1.2 Nm

 Wire connection cross section, flexible(input), max. :16 mm²

Connection data (output)

Conductor cross-section, AWG/kcmil , max.  :6

Conductor cross-section, AWG/kcmil ,min.: 26

Conductor cross-section, flexible , max. 16 mm²

Conductor cross-section, flexible , min. 0.5 mm²  

Conductor cross-section, rigid , max.   16 mm²

Conductor cross-section, rigid , min.    0.6 mm²  

Tightening torque, max. 1.5 Nm

Tightening torque, min. 1.2 Nm

Connection data (signal)

Wire connection cross-section, flexible(signal), max.: 16 mm²

Wire connection cross-section, flexible(signal), min.: 0.5 mm²

Wire connection method:Screw connection

Wire cross-section, AWG/kcmil , max.    12  

Wire cross-section, AWG/kcmil , min.    26

Wire cross-section, solid , max. 16 mm²  

Wire cross-section, solid , min. 0.5 mm²

Signalling

Floating contact:Status relay (max. load)   

Fault (alarm) (30 V AC/DC0.1 A), Battery operation(buff.) (30 V AC/DC 0.1 A),Laden (Charg.) (30V AC/ DC 0,1A)

Status indicator:   Three-colour LED:

Battery capacity >85%

green, >40% yellow,

>20% red, <20% red (Flashing), Green/ yellow LED: normal /

buffering, Yellow/red LED: temperature alarm / alarm, Yellow/red

LED: switch-off / battery fault