Yaskawa Servo Motor SGMMV-A3A2A2C

07/30/2020

Operation flowchart of cold chain cold storage management system

In recent years, the growth of people's demand for fresh food has promoted the development of the cold storage industry, and at the same time has brought many problems and challenges. For example, there are too many idle cold storage resources;

08/17/2020

Air conditioning unit filter and heat exchange equipment dust and scale treatment method

Summary: Dust and fouling occur on filters and heat exchangers, which are not economical for the operation of air conditioning units and cannot guarantee normal use requirements.

07/14/2020

Key factors for energy saving of screw air compressor

Key factors for energy saving of screw air compressor The rotor profile of the screw air compressor has a certain impact on energy saving. Before 2000, the screw air compressor was still in the growth period, and reliability was the main problem. At that time, the rotor profile development of screw air compressors made reliability the main goal.

06/23/2020

How to solve if the air conditioner is not cooling

If it is not in the cooling state, we can adjust it to the cooling mode; if the dust accumulation of the air conditioner severely reduces the cooling function, we can find professional personnel to disassemble the evaporator, fan blade, and filter. Completely clean up; if it is because no refrigerant is added, then we can add refrigerant.

07/29/2020

Causes of air-conditioning noise and treatment methods

Definition of noise:<br></br> 　　1. The definition of noise: From the perspective of physiology and psychology, it refers to all the sounds that people don't need. From an industrial point of view, the sounds emitted by products are noise.

06/29/2020

Several causes of compressor burning

11/15/2024

Understand VFD Better by Wiring the Main Circuit and Control Circuit

1.1 Open the cover by squeezing the grooves on both sides of the VFD(variable frequency drive), remove the wire baffle, connect the terminals R, S, T to the power, connect the terminals U, V, W to the motor, and connect the earth wire at the ground symbol.

09/10/2020

10 principles of air compressor selection

Air compressor is the basic product of industrial modernization. Air compressor is to provide air source power. It is the main body of electromechanical bleed air source device, which is the core equipment of pneumatic system.

06/29/2020

Introduction of measures for compressor pressure protection

Introduction of measures for compressor pressure protection Measures for compressor pressure protection include the following: 1. Control of suction and exhaust pressure When the compressor is running, due to the system or the compressor itself, the discharge pressure may be too high or the suction pressure may be too low. For this reason, the suction and discharge pressures need to be controlled.

06/14/2020

What are the causes of frost in refrigeration compressors

1. The opening of the thermal expansion valve is too large, or the installation of the temperature sensor is incorrect and the fixing is not firm or loose. The main reason is that the temperature sensor may feel the temperature too high in this case, resu器2䀀
ￜ皥
䖒皦즠Ʋ奌ི㲈Ʋ
䌁皦
ᮔDž