Baumer Sensor FEDM 08P3001/S35L

08/24/2020

Why does the cooler temperature drop slowly

1. The cold storage has a large loss of cold due to poor heat insulation or sealing performance. 　　 Poor thermal insulation performance is due to insufficient insulation thickness of pipes, warehouse insulation walls, etc.,

09/15/2020

Dewatering device in Fusheng air compressor

During the compression work, part of the lubricating oil must be mixed into the compressed air, which will cause some failures in the pneumatic circuit, damage the pneumatic components, reduce the service life of the components, reduce the production efficiency, and even cause accidents.

07/25/2020

Refrigerant and its leak detection

Nowadays, electronic technology has penetrated into all areas of life and has helped us simplify our daily routines. The refrigeration industry is no exception. In terms of refrigerant leak detection

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms

09/11/2020

Noise analysis and treatment of air compressor

Noise analysis and treatment of air compressor A compressor manufacturer's statement: The noise level guarantee is +3dBA, which means that its noise level will be twice or one half of the declared noise level.

02/27/2021

The internal structure and characteristics of the micro servo motor

A miniature servo motor includes a small DC motor, a set of variable speed (reduction) gear sets, a feedback adjustable potentiometer and an electronic control board. Among them, the high-speed rotating DC motor provides the original power and drives the variable speed (reduction) gear set to produce a high torque output. The greater the gear ratio of the gear set, the greater the output torque of the servo motor, that is to say, the greater the weight it can bear, the lower the speed of rotation it will be.

09/08/2020

What environment will affect the operation of the air compressor

The surrounding environment of the air compressor will also have a significant impact on the operation of the air compressor. The following phenomena are mainly caused by the analysis of the cause of the failure caused by the bad surrounding environment, so the user should try to meet the standard requirements when installing the air compressor to deal with the surrounding environment .

09/05/2020

What are the reasons for excessive oil content in exhaust gas and how to deal with it

1) The screw oil level is too high. If the oil level is too high, the fluctuation of the liquid level in the oil and gas barrels during the operation of the unit will cause a large amount of gas to enter the oi

09/06/2020

Selection and verification of pressure vessel safety accessories

1 Pressure vessel and its safety accessories 　　 Pressure vessel is a closed device, not only carries a certain pressure, but usually contains gas or liquid inside, and metal and non-metal materials are common. There is a large pressure difference between the inside and outside

07/10/2020

Hitachi

Hitachi original place：Japan Brand introduction: Hitachi was established in 1910. In the industry, it is a diversified enterprise integrating household appliances, computer products, semiconductors, industrial machinery and other products.