Fluid: Air(to be filtered by 40u m filter element)
Mounting type: Basic FA LB TC TCM1
Operating pressure: 0.15 to 1.0 Mpa(22 to 145psi)(1.5 to 10.0bar)
Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(degrees Celsius): -20 to 70
Speed range(mm per second): 30 to 800
Cushion type: Variable cushion
Bore size: 40mm
Stroke1: 400mm
Stroke2: 450mm
AirTAC AirPneumatic Cylinder SCT40X400X450S StandardPneumatic Cylinder(Double acting muti-position type)
People who bought this item also viewed
NEW-ERA Air Cylinder PXY-SD12-1-LF
Festo Air Cylinder AEVULQZ-16-10-P-A
CHANTO Air Cylinder MSR32X75
AirTAC Air Cylinder TCM16X30S
AirTAC Air Cylinder MARU32X150S
AirTAC Air Cylinder HRQ10A
Festo Air Cylinder ADN-16-5-A-P-A
Festo Air Cylinder DSBG-160-400-PPVA-N3
CHANTO Air Cylinder ASR50X50
KOYO Absolute Rotary Encoder TRD-MA512P
Belimo Actuator SM24AX-S
Parker Proportional Valve D1FVE02CC0NS0314
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
Contrinex Sensor BD4-S4-M12S
Cutler Hammer Circuit BreakerE125S 80A
TTI Relay TRSB-12VDC-SB-L15
Schneider Controller Module TMC4AI2
Siemens Circuit Breaker 3RV2021-1AA25
Recent related posts
-
01/18/2023
What is Variable Valve Timing?
VVT refers to variable valve timing. It adjusts the amount of intake (or exhaust), as well as the timing and angle of solenoid valves opening and closing according to the operating conditions of the engine.
-
08/20/2020
Understand the knowledge of quick-freezing cold storage to solve all the incurable diseases of quick-freezing cold storage
Quick-freezing cold storage refers to a method in which food quickly passes through its largest ice crystal formation area and freezes quickly when the average temperature reaches -18°C. The temperature of quick-freezer is usually -15℃~-35℃.
-
07/31/2020
What kind of equipment is generally used in cold storage How to select the refrigeration equipment
The cost of cold storage with a refrigeration capacity of less than 60kw is relatively large. It is generally suitable for small cold storage and air conditioning units. The cost of such small cold storage within 100 square meters ranges from 30,000 to 100,000.
-
03/01/2021
Matters needing attention
1.Oil and water protection of servo motor 1) The servo motor can be used in the place that will be attacked by water or oil drops, but it is not completely waterproof or oil-proof. Therefore, the servo motor should not be placed or used in the environment of water or oil invasion. 2) If the servo motor is connected to a reduction gear, the oil seal should be filled when using the servo motor to prevent the oil of the reduction gear from entering the servo motor 3) The cable of servo motor should not be immersed in oil or water.
-
05/04/2023
What is an HVAC System?
There are many systems and components in a home or building that we take for granted, such as roofs, plumbing, and electricity. HVAC is the main system that probably will be most underrated: a massive heating and cooling system driven by a miniature thermostat.
-
08/08/2020
Calculation method of weight per meter of air conditioner copper pipe
Calculation method of weight per meter of air conditioner copper pipe Everyone should know something about the air-conditioning copper pipe. The material of the air conditioner copper pipe is copper, which is pure copper.
-
09/14/2020
Analysis of why the compressor shell will condense
When the compressor is working normally, it is close to the low pressure cavity of the compressor. The temperature of the steel casing on the side is very low, if the compressor casing
-
03/03/2021
Control mode of servo motor
Torque control: the torque control mode is to set the external output torque of the motor shaft through the input of external analog quantity or the assignment of direct address. For example, if 10V corresponds to 5nm, when the external analog quantity is set to 5V, the output of the motor shaft is 2.5nm: if the load of the motor shaft is lower than 2.5nm, the motor will rotate forward, and when the external load is equal to 2.5nm
-
07/12/2020
"Fire Eyes Gold Eyes" Training Guide: Genuine Danfoss Compressor
The current Danfoss compressor nameplate?
-
03/14/2021
Maintenance of servo drive
1.Maintenance of operating environment of servo driver In order to prolong the service life of the servo driver, the following problems should be paid attention to in the process of use. Temperature, humidity, dust, vibration, input voltage and other factors should be considered for the system environment.