Analysis of why the compressor shell will condense

Analysis of why the compressor shell will condense

When the compressor is working normally, it is close to the low pressure cavity of the compressor.

The temperature of the steel casing on the side is very low, if the compressor casing

Lower than the dew point of the ambient air at that time, the water vapor in the environment

Air will condense in this part. All said outside the compressor

Shell condensation is a normal phenomenon related to environmental humidity!

Recent related posts

09/14/2020

Analysis of why the compressor shell will condense

When the compressor is working normally, it is close to the low pressure cavity of the compressor. The temperature of the steel casing on the side is very low, if the compressor casing

09/14/2020

Analysis of the consequences of refrigerant liquid entering the compressor

When the refrigerant liquid entering the evaporator is too much or the evaporation pressure is too low, the cold The medium liquid will be sucked into the compressor. Since the refrigerant liquid is incompressible,

09/14/2020

A new generation of air compressor comes out

At present, the product has 1 national invention patent and 2 utility model patents. Its successful development will have a significant impact on the compressor field in my country and the world.

09/11/2020

What are the tips for using screw air compressors

The set unloading pressure of the air compressor pressure regulator is adjusted with the upper adjusting bolt. Turn the bolt clockwise to increase the unloading pressure, and rotate it counterclockwise to reduce the unloading pressure. The differential pressure value is adjusted by the differential knob at the bottom. Turn it counterclockwise, the pressure differential value of the air compressor decreases, and clockwise

09/11/2020

Ways to reduce bearing noise

Ways to reduce bearing noise (1) Method of using chemical additives Adding certain chemical additives to the bearing lubricant can reduce bearing noise. For example, a low-noise grease containing noise-reducing additives produced by a factory in Tianjin can reduce bearing noise by 3.9-9.2dB from the original basis. , Suitable for use in miniature or small bearings.

09/11/2020

Thrust bearings

Thrust bearing: Rolling bearing mainly used for bearing axial load, its nominal contact angle is 45-90 degrees. According to the difference of nominal contact angle, it is divided into:

09/11/2020

The air-conditioning industry "sell inventory" model is outdated

The implementation of the new energy efficiency standards for air conditioners is imminent, but the market is showing two different phenomena: most companies have launched an unprecedented price war to hit the peak season market with low prices;

09/11/2020

Summary Essentials of water treatment for central air-conditioning chillers

Looking at the management of central air-conditioning throughout the country, it is found that very few are well managed, and all have problems of one kind or another to varying degrees. The main problems are described as follows: 1. Problems caused by the unreasonable design of the design department

09/11/2020

Silent air compressor, oil-free air compressor

There are many types of manufacturers and sales. According to the air quality requirements, they can be basically divided into oil lubrication and oil-free lubrication. Here the author focuses on the purchase of oil-free air compressors.

09/11/2020

Several Improvements on the Easy Failure Points of Air Compressor

The original compressor has poor cooling effect and low efficiency. The improvement method is to introduce the water that enters the primary and secondary cylinders and the intercooler directly from the main pipe to the water collecting funnel after cooling.