Fluid: Air(to be filtered by 40u m filter element)
Mounting type: Basic FA LB TC TCM1 Operating pressure:
Double acting: 0.15 to 1.0 Mpa(22 to 145psi)(1.5 to 10.0bar)
Single acting: 0.2 to 1.0 Mpa(28 to 145psi)(2.0 to 10.0bar)
Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(degrees Celsius): -20 to 70
Speed range(mm per second):
Double acting: 30 to 500
Single acting: 50 to 500
Cushion type: Bumper
Bore size: 20mm
Stroke: 70mm
AirTAC AirPneumatic Cylinder SDA20X70 CompactPneumatic Cylinder(Double acting)
People who bought this item also viewed
CHANTO Air Cylinder DXSL20X15
Festo Air Cylinder AEVULQZ-16-10-P-A
MINDMAN Air Cylinder MCQV2-11-40-200
AirTAC Air Cylinder TR25X10S
AirTAC Air Cylinder ACQ50X40S
AirTAC Air Cylinder TCMJ20X20-20S
Festo Air Cylinder ADVU-25-25-A-P-A
SHAKO Air Cylinder JC40B05
Festo Air Cylinder DNC-80-500-PPV-A
Festo Air Cylinder EMMZ-10-5-P-A
Kwangwoo KW Encoder RAA-001007-2102
SMC Solenoid Valve VPA742-1-04A-03A
Belimo Actuator AVK24A-3-TPC
SMC Proportional Valve ITV2010-012S
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
Nichicon Capacitor UFW1J470MED
TEND Switch T2ITL2O-1C
Recent related posts
-
08/29/2022
4 Common Types of Circuit Breakers
The circuit breaker is an automatic device for stopping the flow of current in an electric circuit as a safety measure.
-
08/17/2020
Why can't the cold storage temperature drop The evaporator is very important!
There are many reasons why the temperature of the cold storage cannot drop. The editor of okmarts.com lists the following six common phenomena for your reference:
-
08/20/2020
How much is the temperature of the industrial chiller to prevent condensation
Condensation water in the industry is mainly caused by the large temperature difference between the ambient temperature and the cooling water temperature of the chiller.
-
09/05/2020
Common sense of micro vacuum pump
The so-called vacuum refers to a gas state with a pressure lower than 101325Pa in a given space. In the vacuum state, the lean degree of gas is usually expressed by the pressure value of the gas. Obviously, the smaller the pressure value, the thinner the gas. There are various vacuum pumps in the industry. There are prescribed test methods for the performance of various pumps. The main parameters are:
-
08/03/2020
What is the cooling system of the computer room refrigeration facility, adsorption refrigeration, and assembly cold storage
Many people have little understanding of the cooling system of the computer room refrigeration facility, adsorption refrigeration, and prefabricated cold storage.
-
04/13/2022
What is A Flowmeter?
Modern flowmeter is an exquisite instrument developed in the 18th and 19th centuries. The type of flowmeter are constantly improved with the change of society
-
10/30/2021
Study on the Performance of Single Phase AC-DC-AC Inverter Circuit
Variable Frequency Drive(VFD) converts power in the motion control system. The motion control system now contains a variety of disciplines.
-
06/25/2020
Why does the use of cold and air conditioning in a car increase fuel consumption because the car cannot carry a compressor
Automotive air conditioning system _ compressor power is not high Knowledge point: The principle of the "refrigeration system" of automobile air conditioners is the same as that of domestic air conditioners. Both use compressors to drive refrigerants to achieve cooling by the principle of "evaporation and heat absorption".
-
08/02/2021
Daikin Vs. Hitachi Air Conditioners
In summer, what is the best-selling electrical appliance in the electrical market? Air conditioners can be said to be one of the indispensable appliances in the family.
-
09/07/2020
Ten most commonly used parameters of frequency converters
There are many function parameters of the frequency converter, generally there are dozens or even hundreds of parameters for users to choose. In actual applications, it is not necessary to set and debug each parameter, most of which just need to use the factory settings.