How much is the temperature of the industrial chiller to prevent condensation

How much is the temperature of the industrial chiller to prevent condensation

Condensation water in the industry is mainly caused by the large temperature difference between the ambient temperature and the cooling water temperature of the chiller. Generally, condensed water will be generated when the difference is about ten degrees. Therefore, it is recommended to set the temperature to be less than 8 degrees Celsius from the room temperature, or use it directly The intelligent temperature control mode of the special domain chiller can automatically adjust the water temperature with the change of the ambient temperature, effectively avoiding the generation of condensed water

Recent related posts

08/20/2020

How much is the temperature of the industrial chiller to prevent condensation

Condensation water in the industry is mainly caused by the large temperature difference between the ambient temperature and the cooling water temperature of the chiller.

08/20/2020

How can fruit and vegetable cold storage meet energy-saving requirements

There are many factors to consider for energy saving in cold storage, including the performance of cold storage refrigeration system, the selection of refrigerant, the selection of compressor condenser and evaporator,

08/20/2020

High and low temperature test chamber refrigeration failure What unique secrets do you need to master

The high and low temperature box does not refrigerate, which means that there is a problem with the compressor. A complete refrigeration system is composed of a compressor, a condenser, a throttling device and some auxiliary equipment.

08/20/2020

Frequency conversion energy-saving control method of central air-conditioning water circulation system

The energy consumption of the air-conditioning water system accounts for a large part of the entire air-conditioning system. Therefore, it is of great significance to study the energy saving of the air-conditioning water system.

08/20/2020

Failure analysis Is the air conditioner buzzing about to explode

Summer is the peak season for air-conditioning, and the frequency of air-conditioning in the home has increased significantly. After frequent use, some friends say that the air-conditioning in the home is always buzzing.

08/20/2020

Evaporator fouling is harmful. Several common evaporator fouling measures must be

Evaporator and preheater fouling means that the concentrated salt wastewater contains a large amount of impurity salts, which form crystal nuclei after continuous evaporation and concentration.

08/20/2020

Emergency shutdown treatment for sudden cooling water cut

During the operation of refrigeration equipment, accidents of sudden cooling water interruption sometimes occur. The cause of this accident is generally the failure of the cooling water pump.

08/20/2020

Eight installation considerations for refrigeration compressor units

my country's cold storage has entered a stage of explosive growth. The industry is developing very rapidly, but the structure is not very reasonable. Domestic cold chain logistics parks have

08/20/2020

Don't miss the most common Gree air conditioner fault code analysis

Gree air conditioners have an unparalleled market share. Naturally, there are many small partners who use Gree air conditioners, but after a period of time, the air conditioners will have some unfamiliar and unknown fault codes.

08/20/2020

Don't blindly repair the refrigeration compressor if it fails to contact the manufacturer is the best policy

The environmental temperature and humidity test box is mainly used for product temperature, humidity alternating and high and low temperature rapid alternating cycle tests, and its purpose is to detect the reliability of products under high and low temperature impact tests.