Bore size(mm):50
Temperature:-20...70 degrees Celsius
Cushion type:Bumper
AirTAC Air Cylinder SDAT50X20X20
People who bought this item also viewed
CHANTO Air Cylinder MSR32X75
STNC Air Cylinder TGC80x50-S
AirTAC Air Cylinder SGC125X150-S
AirTAC Air Cylinder ACQ63X40S
AirTAC Air Cylinder TR10X20S
AirTAC Air Cylinder ACKR40X90
MINDMAN Air Cylinder MCJA-12-12-20
Festo Air Cylinder DGC-K-25-800-PPV-A-GK
Festo Air Cylinder ADNGF-25-50-P-A
Festo Air Cylinder DSNU-32-80-P-A
CKD Solenoid Valve 4GA219-E2C
SIEMENS Actuator SKC82.61U
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
KITA Switch KP43V-F1
PIZZATO Switch PC 3-2
ELNA Capacitor 400V 10UF
KSK Oil SealTC(NBR)25X47X10
Recent related posts
-
07/27/2020
What should I do if the compressor burns out?
Why does the compressor burn the motor? What is the cause of the burn-in phenomenon? A summary of the reasons for motor burn-in can be divided into: load, power supply, motor insulation, and lack of equivalence.
-
08/13/2020
Why the air energy heat pump does not heat
It is a common phenomenon that air energy heat pumps do not produce heat. When air energy heat pumps were used in the winter of previous years, the water temperature would be insufficient.
-
06/21/2020
Common system failures of refrigeration equipment
Common system failures of refrigeration equipment 1. Liquid return: For refrigeration systems using expansion valves, liquid return is closely related to the selection and use of expansion valves. Expansion valve selection is too large, the superheat setting is too small, the installation method of the temperature sensor is incorrect, the insulation bandage is damaged, and the expansion valve failure may cause liquid return.<img src="{{media url="Common_system_failures_of_refrigeration_equipment2.png"}}" alt="" />
-
08/10/2020
Four anti-corrosion methods for heat exchangers
There are four main anti-corrosion methods for heat exchangers: corrosion-resistant materials, electrochemical protection, adding corrosion inhibitors, and anti-corrosion coating methods.
-
07/19/2020
Advantages of adding economizer to screw chiller
The temperature control range of the standard screw chiller is 3~35℃, and the efficiency is significantly reduced when operating under lower temperature conditions. In order to meet the temperature requirements of more industries for chillers, make the single-stage screw compressor work according to the two-stage refrigeration cycle and achieve the effect of energy saving, an economizer can be added to the unit.
-
05/25/2023
How an AC Compressor Works and Its Common Types (with Pictures)
For the electrical product—— the air conditioner, the air conditioner compressor (AC compressor) is an indispensable structure for the normal use of the air conditioner.
-
07/28/2022
How to install a Vane Pump
The pump body is installed and fixed on a special foot rest with screws, and the foot rest is fixed on the base plate of the machine and equipment with bolts.
-
03/14/2023
Working Principles and Characteristics of Common Water Pumps
Water pump is a machine that transports or pressurizes liquids, which is mainly composed of impeller, pump case, pump shaft, bearing, filling seal device, and other parts.
-
07/29/2020
R32 refrigerant training
Note: For products using R290 (such as dehumidifiers), if system failures are involved, automatic welding torch repairs are strictly prohibited. Please return the products to the factory according to the process.
-
09/18/2021
Analysis of Refrigerant Prices Rising
Refrigerant is a compound that usually exists in a liquid or gaseous state. It easily absorbs heat from the environment