Balluff Sensor BOS0127

06/14/2020

Compressor shutdown for screw compressor repair

Among the many refrigeration compressors, the screw compressor is the most extensive one. When the screw compressor suddenly stops after working for a day, a reasonable treatment method should be carried out to ensure that it can be used normally next timﰸ2䀀
ￜ皥
䖒皦즠Ʋ娼ི㲈Ʋ
䌁皦隆
ᮔDž༬皧婆ིЀ呄ᠾ鹨់༹皧
ࠄ

09/11/2020

Bearing according to the number of rows of rolling elements

According to the number of rows of rolling elements, bearings are divided into:<br></br> 1. Single row bearing: bearing with one row of rolling elements;<br></br> 2. Double row bearings: bearings with two rows of rolling elements;<br></br> 3. Multi-row bearings: bearings with more than two rows of rolling elements and bearing loads in the same direction.<br></br>

08/15/2020

How to exclude inferior refrigeration products

1. Function 　　A, low cooling power. The matched unit power is about 30% to 40% smaller. Generally, a 1.0 cubic four-door supermarket freezer matches a 1/2HP compact machine,

06/29/2020

Compression ratio of American Copeland compressor

08/20/2020

Selection and design of cold storage doors

Under normal circumstances, the cold storage door as one of the cold storage equipment only accounts for less than 10% of the entire system cost. After the entire system is put into use, it has almost become the "front" of the entire system.

09/01/2020

The most complete version｜Basic theoretical knowledge of compressed air (2)

Six, compression and compression ratio 　　1, compression 　　 Adiabatic compression is a compression process in which gas heat is not significantly transferred or transferred during the compression process.

08/17/2020

How to recover refrigerant

1. How to recover the refrigerant from the industrial chiller to the accumulator? 　　The specific operation steps for recovering the refrigerant from the industrial chiller to the accumulator are:

03/28/2025

Comparison of advantages and disadvantages of dry evaporator and flooded evaporator

The refrigerant of the dry expansion evaporator evaporates in the tube. The superheat at the outlet end of the evaporator is usually about 5 to 10K. The expansion valve uses the superheat detected by the temperature sensor to adjust the refrigerant flow r碌7館2䀀締眪湠眷V

09/20/2022

How Does a Hydraulic Pump Work?

In modern construction machinery, hydraulic working devices are basically inseparable.

09/05/2020

Why permanent magnet variable frequency air compressor will become the future development trend

Permanent magnet variable frequency air compressors are widely used in industry, and people can't help but remind people of industrial frequency-driven air compressors.