Banner Sensor Q45BB6DQ

08/16/2020

What factors will cause the cooling performance of water-cooled chillers to decline

Water-cooled chillers are especially suitable for places with abundant water resources. The operation is more stable. It has the characteristics of large single-unit cooling capacity and high cooling efficiency.

06/14/2020

What are the causes of frost in refrigeration compressors

The importance of refrigeration compressors in the entire cold storage refrigeration system is self-evident, I believe everyone knows. Next look at the editor to teach you to turn around.

09/07/2020

Commonly used energy saving points for air compressors

Air compressors are recognized as energy-intensive process equipment, and screw compressors are no exception. However, in the daily operation process, the energy consumption of screw compressors often does not attract enough attention from operating units. The main reason:

07/01/2020

Three major causes of compressor cracks in winter

Three major causes of compressor cracks in winter When using the compressor in winter, we may encounter some problems, such as cracks in the compressor body. There are many ways to cause cracks in the compressor. After summing up, the specifics can be summarized as the following three points:

08/20/2020

Placement of the thermostatic valve bulb

The bulb should be as close as possible to the outlet of the evaporator and placed in close contact with the outlet pipe. In the part of the pipe section where the temperature bulb is in contact with the pipe,

06/14/2020

Refrigeration compressor configuration application and precautions

Compressor configuration Generally speaking, semi-hermetic compressors are equipped with: oil filter, oil hole, exhaust with pressure gauge interface, suction cut-off valve, suction filter, sight glass.

01/14/2025

Refrigerator PTC Relay Wiring Method

The PTC (positive temperature coefficient) relay is directly connected in series with the secondary winding (start winding).

06/29/2020

Compression ratio of American Copeland compressor

06/11/2024

Hydraulic Systems: Common Faults and Solutions

The hydraulic system is a high-precision, high-efficiency energy transmission system that is widely used in various mechanical equipment.

08/11/2020

What will happen if the thermal expansion valve is configured too large

A 10P air-conditioning unit is equipped with a 12-ton (1 cooling ton=3.517KW) expansion valve. What will happen?<br></br> 　　 If you follow the DANFOSS selection software, this configuration will not be recommended (all think this type of selection is too large)<br></br>