Baumer Encoder BFG 1G.24K4096-E2-5

06/14/2020

Daily cold storage system maintenance method

Daily cold storage system maintenance method For large-scale refrigeration equipment such as cold storage, we should usually do daily inspection and maintenance in order to quickly eliminate the abnormal operation of the cold storage, thereby reducing th器2䀀
ￜ皥
䖒皦즠Ʋ奌ི㲈Ʋ
䌁皦
ᮔDž༬皧奖ིЀ呄ᠾ鹨់༹

07/31/2020

Reasons for uneven liquid distribution in refrigeration systems and tragic cases!

If the distribution head is not evenly distributed, it will cause too much refrigerant in some of the bypasses and frost the evaporator.

06/14/2020

Scroll compressor 2020 or will enter the dark moment

Affected by factors such as product competition and the weakening of downstream demand, in the context of the overall downturn in the HVAC industry,

08/07/2020

Refrigeration unit fan equipment refrigeration system maintenance

1. To operate the unit, always observe the oil level and return of the compressor and the cleanliness of the oil. If the oil is dirty or the oil level drops, it should be solved in time to avoid poor lubrication.

07/19/2020

The role of refrigerant in the air-cooled chiller

The refrigerant itself circulates continuously in the refrigeration system, and then realizes refrigeration through its own state changes. The refrigerant absorbs the heat of the cooling medium in the evaporator and vaporizes, and transfers the heat to the surrounding air or water in the condenser to condense.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

09/29/2022

Positive Displacement Pump vs Centrifugal Pump

<strong>Positive displacement pump</strong> refers to the pump that uses the internal volume changes of the pump cylinder to transport liquid

06/27/2022

How to Test an Encoder with a Digital Multimeter

A basic multimeter can be utilized to measure the encoder’s parameters. Bear in mind that a digital multimeter can measure the average duty cycle, frequency, peak voltage, and average voltage of an encoder.

09/05/2020

Ten points to judge the pros and cons of inverter products!

The technical grade of the frequency converter is gradually developed and formed. With the improvement of use requirements and the development of technology, the quality of the device, the expansion of functions, and the progress of automation technology, it will gradually advance.

07/27/2020

In order to extend the life of the screw unit, these failures must be avoided

During the use of screw chillers, there are some failures, such as high pressure failure, low pressure failure, low valve temperature failure, compressor overheating failure, communication failure, etc.,