Beckhoff Module KL1434

01/06/2023

How to Improve the Quality Factor of the Solenoid Coil?

The quality factor Q is an important parameter reflecting the quality of the solenoid coil, and improving the Q factor of the coil can be said to be one of the key points of winding the coil.

07/27/2022

Classification of Vane Pumps

During a rotation cycle, the volume between adjacent vanes changes because of the rotor’s eccentric mounting position. This creates the pumping action.

08/13/2020

The way is right

Nowadays, cold storage has been widely used in the preservation of vegetables, fruits, fish and meat. But sometimes after use, there will inevitably be some aftertaste inside;

01/16/2021

Refrigerator compressor maintenance case

Refrigerator compressor maintenance case Case description: The repair is a Refrigerator 220 direct-cooled refrigerator, which starts after the contact is stuck, causing the refrigerator compressor to start normally and sometimes abnormally.

07/22/2020

Carrier screw compressor motor repair

Carrier screw compressor motor repair<br></br> <br></br> Performance characteristics<br></br> <br></br>  Use of chlorine-free refrigerant HFC-134a;<br></br> <br></br> 06N twin screw compressor achieves high full load efficiency;<br></br> <br></br>  Use flooded evaporator and condenser to enhance heat exchange efficiency;<br></br> <br></br>  Using electronic expansion valve, precise control;<br></br>

08/24/2020

Poor cooling equipment There is a foreign body at work!

In the refrigeration system, the refrigerant contains various foreign substances such as moisture, non-condensable gas, refrigerating oil, metal shavings, grease, fiber, dust, etc.

07/28/2020

Analysis of common failure causes of hermetic refrigeration compressors

. How to identify the 3 terminals on the casing of a hermetic compressor?<br></br> The resistance between running terminal (R), starting terminal (S), common terminal (C), RS is greater than the resistance between SC and RC. The resistance between RS is equal to the resistance between SC and the resistance between RC.

05/18/2022

How to Measure Air Pressure in A Cylinder?

During use, the cylinder piston bank will deteriorate due to wearing, ablation, gumming, carbon deposition and other reasons.

02/10/2023

How to Replace a Blend Door Actuator?

Blend door actuators control the temperature and flow of air in the vehicle. If your vehicle only releases cold air, or you can't change the airflow

06/29/2020

Compression ratio of American Copeland compressor