Bitzer Compressor 6HEP-35-40S

08/13/2020

Correct operation method and precautions of distribution box during cold storage installation

In the process of cold storage installation, the use of cold storage power distribution boxes is a very important content, but most people are not very familiar with the normal operation of cold storage power distribution boxes.

09/07/2020

Do you know that lubricating oil can save energy

Engine oil, engine blood. It shows its importance. However, some of the performance of engine oil will still be ignored. For example, many people don't know if engine oil can save energy? The answer is yes.

08/20/2020

Operation procedure of chilled water system

In order to better ensure the normal refrigeration of the chiller, the general chilled water system operation should be carried out when the outdoor temperature is higher than about 30℃,

06/29/2020

What are the causes treatment and prevention methods of compressor liquid blow

What are the causes, treatment and prevention methods of compressor liquid blow Liquid blow means that the refrigerant liquid or wet steam is sucked into the compressor by the compressor due to failure or insufficient absorption of heat, which is called liquid blow. First, the main reasons are as follows:

06/29/2020

What is the cause of compressor pipeline vibration

03/11/2022

Why are Your Refrigerating Machine and Compressor Making Abnormal Noises?

The operation sound of the refrigerating machine is unavoidable. The fan rotating, fan blade rubbing with the air would make the noise that is normal.

08/13/2020

How to deal with the high pressure overload of the chiller

When the condenser heat dissipation is poor, the compressor efficiency is low and the operating current increases. When the high pressure rises to 19Kg/cm2, the compressor trips under the protection of the high pressure switch and the compressor stops runPﰨ2

08/19/2020

The lower the cold storage temperature, the better is a misunderstanding

Most professional refrigeration professionals believe that the lower the temperature the cold storage is built, the better, and the shelf life of ice storage can be extended. Experts say this is actually a misunderstanding

08/20/2020

What to do when the industrial chiller encounters a water cut

All kinds of failures can be encountered in long-term use of industrial chillers. For industrial chillers, if there is a water cut problem, it is very dangerous and must be dealt with in a timely and effective manner.

08/05/2020

Simple estimation and measurement of indoor and outdoor wind pressure difference in fresh air system

At present, most of the fresh air systems we use follow the design philosophy of large air volume and slight positive pressure, but many people are also confused about this. How to detect the pressure in the room on site?