Bitzer Compressor GUD60137VLB6-2

08/31/2020

How to achieve zero consumption of compressed air for drainage

This article discusses the working principle of the compressed air zero-consumption automatic steam trap, and gives the most marketable accessory installation sample structure, and the actual energy-saving effect achieved in the actual application of the enterprise.

08/17/2020

Problems that need attention in the use, installation and maintenance of air-cooled chillers

Air-cooled chillers have many advantages in terms of performance, which makes it more and more widely used, and its advantages such as small footprint and fully computerized automatic control operation management mode have been favored by more enterprise 碌7館

03/13/2021

Working mode of servo driver

The working modes of servo driver are: open loop mode, voltage mode, current mode (torque mode), IR compensation mode, Hall speed mode, encoder speed mode, tachometer mode, and analog position loop mode (ANP mode). (not all of the above modes exist in all models of drives)

08/16/2023

Pros and Cons of Heat Pump vs Gas Furnace: Which is Better for Your Home?

As winter approaches, many homeowners are faced with the question of which heating system to choose for their home. The two most popular options are heat pumps and gas furnaces. Each has its own set of advantages and disadvantages.

09/10/2020

Causes of Compressor Common Failures and Countermeasures Analysis

Abstract: During the operation of the compressor, some failures and even accidents will inevitably occur. A fault refers to an abnormal condition that occurs during the operation of the compressor, which can be restored to normal operation once the compressor is eliminated, while an accident refers to a damage situation. The two are often related, and if the fault is not eliminated in time, it will cause a major accident.

08/09/2020

What are the characteristics of logistics cold storage construction

With the rapid development of modern commerce, the original cold storage for product storage has become increasingly unable to meet the rapid, accurate, and small-batch circulation needs of modern commodities.

01/15/2022

Case Studies of How to Replace a Compressor in Refrigerator (Part Two)

As we have mentioned in the first part, it’s the refrigeration capacity, the clean piping system, and the drying filter that deserve our attention.

02/09/2023

What is a Blend Door Actuator?

Blend door actuators, also known as Heating, Ventilation, and Air Conditioning (HVAC) actuators, control the position of the vents and the air flowing into the passenger area of the vehicle.

08/02/2020

The hazards and causes of high exhaust temperature of cold storage compressor

The discharge temperature of cold storage compressors should generally be 15~30℃ lower than the flash point of the lubricant, and not too high.

06/14/2020

Danfoss cocuses on providing energy efficient, sustainable and smart refrigeration compressors for a varied range of commercial applications such as cold rooms