Bristol Compressor H27B18QCBCE

03/03/2021

Type selection calculation of servo motor

Confirmation of speed and encoder resolution. Conversion of load torque on motor shaft and calculation of acceleration and deceleration torque.

09/02/2020

Why do dry goods 〡 air compressor need staged compression? Can't it be compressed once?

Many people know that two compressor stages are suitable for high pressure production, and one stage is suitable for large gas production. Sometimes, more than two compressions are needed.

06/30/2020

Broken suction valve of Bristol compressor

Broken suction valve of Bristol compressor A Bristol compressor is a machine that compresses gas. Generally, the piston compresses gas 1450 times per minute (half-sealed compressor) or 2900 times (full-sealed compressor), that is, the time to complete an intake or exhaust process is 0.02 seconds or even shorter.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

08/16/2020

Why is the temperature too low after the cold storage is installed

After the cold storage is built, the first thing should be tested, so that we can know whether there will be problems after the cold storage is installed. Such a problem needs to be considered in the initial stage of the general cold storage installation.

06/18/2020

Main components of reciprocating compressor_Advantages and disadvantages of reciprocating compressor

Reciprocating compressor<img src="{{media url=&quot;wysiwyg/Main_components_of_reciprocating_compressor_1.jpg&quot;}}" alt="" /> 　　Reciprocating compressor refers to a type of compressor that reciprocates the piston or diaphragm in the cylinder to periodically change the volume of the cylinder and realize the pressurization and delivery of gas. It is a positive displacement compressor. According to the reciprocating components, it is divided into piston type and diaphragm type compressors.

09/10/2020

The formation and harm of carbon deposits in air compressor

The reasons for the formation of carbon deposits in air compressors are more complicated. In terms of air compressor oil lubrication, the main reason is that the oil used in the internal lubrication system of the air compressor is often in the form of mist and high temperature, high pressure, high oxygen partial pressure air and metal The contact of the catalyst causes the air compressor oil to rapidly oxidize and deteriorate.

07/15/2020

About the built-in pressure relief valve (IPR valve) of Copeland compressors

About the built-in pressure relief valve (IPR valve) of Copeland compressors Among the built-in protection devices of Copeland compressors ZB15-ZB48, ZF06-ZF25, there is a small pressure protection device called built-in pressure relief valve (IPR valve). Below we briefly talk about the work of the built-in pressure relief valve.

04/17/2023

14 Common Ice Maker Problems and How to Fix Them

An ice maker is a mechanical device that can cool water into ice through a refrigeration system. The ice made can be used for cooling food, and can also be used in the cooking process of food to increase the flavor and taste of food.

06/24/2020

Why is the air conditioner not cooling

1.Check whether the compressor is working normally. If the compressor is broken, the air conditioner cannot start normally and there will be no cooling effect. 2. There is not enough refrigerant in the air conditioner. At this time, you need to add Freon, and the time for adding Freon can be very long. 3. The air conditioner itself has quality problems and the electrical components have failed. In this case, you need to find a master to repair it.