Bristol Compressor H71J193ABKA

11/03/2022

Pros and Cons of 4 Pairs of Electric Motors

According to different structures, working principles, types of operating power, and uses, electric motors can be divided into various types.

07/18/2024

How to Tell if a Sprinkler Valve Solenoid Is Bad

Maintaining a lush, green lawn requires a properly functioning sprinkler system, and at the heart of this system are the valves.

06/29/2020

The role of freezing oil in screw refrigeration compressor

The role of freezing oil in screw refrigeration compressor The role of lubricating oil: 　　 1) A dynamic seal is formed between the screw and the compression chamber and the male and female screws to reduce refrigerant leakage from the high-pressure side to the low-pressure side during the compression process.

07/26/2022

What is A Vane Pump

A vane pump is a self-priming positive displacement pump providing constant flow at varying pressures. Operation is via a motor connected to a gearbox as typically the maximum rpm is 900.

06/29/2020

What is the cause of compressor pipeline vibration

08/17/2020

Why can't the cold storage temperature drop The evaporator is very important!

There are many reasons why the temperature of the cold storage cannot drop. The editor of okmarts.com lists the following six common phenomena for your reference:

09/07/2020

An article to fully understand the principle, failure and maintenance of nitrogen compressors

Nitrogen compressors are mainly used in various industrial needs. Pipes are used to connect the original air inlet of the nitrogen compressors and the balance gas tank. When the sealing performance of the sealing box is not very good, the pipeline provides a certain pressure ,

07/31/2020

What should I do if the suction pressure of the refrigeration unit is too low 7 major failure causes to know

In the pharmaceutical, food and other industries, refrigeration units are common equipment, providing reliable protection for various low-temperature environments such as pharmaceuticals.

09/04/2020

Advantages and applications of cast copper rotors in high-efficiency motor remanufacturing

The 2017 Green Production and Consumption International Exchange Conference was held in Shangyu District, Shaoxing City, Zhejiang Province from November 9th to 10th. The exchange meeting was co-sponsored by the China National Institute of Standardization

08/12/2020

Problems that should be paid attention to when selecting plate heat exchanger

1. Board type selection<br></br>　　 　　The plate type or corrugated type should be determined according to the actual needs of the heat exchange occasion.