Bristol Compressor H79A563DBVL

06/25/2020

Classification of air-conditioning compressors

The air-conditioning compressor plays the role of compressing and driving the refrigerant in the air-conditioning refrigerant circuit. The working circuit is divided into an evaporation area (low pressure area) and a condensation area (high pressure area). The indoor unit and outdoor unit belong to the high-pressure or low-pressure area (depending on the working state), and the compressor is generally installed in the outdoor unit.

08/15/2020

Precautions during the use of air-cooled refrigerators

Before using the air-cooled chiller, you can carefully count the operating data of the equipment, and then based on these operating data, you can make a basic judgment on the operating status of the equipment,

09/11/2020

Bearing and shaft fit tolerance standard

Bearing and shaft fit tolerance standard ①When the bearing inner diameter tolerance zone and the shaft tolerance zone form a fit, the tolerance code originally belonging to the transition fit in the general basic hole system will become an over-win fit, such as k5, k6, m5, m6, n6, etc., but the over-win amount is not Large; when the bearing inner diameter tolerance is matched with h5, h6, g5, g6, etc., it is not a clearance but an over-win fit.

09/01/2020

The most complete version｜Basic theoretical knowledge of compressed air (1)

1. Compression purpose 　　The basic purpose of gas compression is to deliver gas at a pressure higher than the original pressure. The original pressure level may vary from a very low absolute pressure (a few thousandths of a kilogram) to several thousand kilograms;

09/11/2020

Provide compressed air without oil, water and dust

The drying effect is achieved through the principle of pressure swing adsorption. Not only can it be matched with a small air compressor, but it can also meet the needs of local users with special requirements behind the large air compressor, so as to avoid the high air quality requirements of individual points and the high configuration of the entire equipment to save investment.

06/29/2020

How the compressor works

06/15/2022

How to Select a HMI?

There are three basic types of HMIs: the pushbutton replacer, the data handler, and the overseer.

08/14/2020

Need heat preservation for precision air conditioner cooling pipes

Whether the cooling water pipes of precision air conditioners should be insulated depends on specific conditions. Under normal circumstances, it is not insulated,

04/16/2025

Data Center Liquid Cooling System Technology (Immersion, Cold Plate, Spray)

With the explosive growth of data volume, the diversity and complexity of data will lead to a gradual increase in the computing power density of general-purpose CPUs.

08/07/2020

Emergency solution for sudden wet stroke failure in refrigeration compressor operation

The refrigeration compressor suddenly encounters a wet stroke failure during operation, that is, after the failure appears, only a quick solution to the problem can avoid a series of more problems caused by the wet stroke