Bristol Compressor H79B30UABHY

06/20/2020

How good is the air conditioning dehumidification

Nowadays, the temperature of some air conditioners is set actively by the manufacturer during dehumidification. Under the dehumidification method of this type of air conditioner, the control circuit will first check the room temperature, and then set the operating temperature policy value. The setting value of the factory plan is usually the policy value of the operation arrival It is 2 degrees lower than the room temperature. If the setting is too high, the dehumidification effect is not significant. In order to prevent overheating and lowering the room temperature during dehumidification, this set value is usually judged. At this time, we do not need to set the temperature, just open the air conditioning dehumidification function.<img src="{{media url=&quot;How_good_is_the_air_conditioning_dehumidification.jpg&quot;}}" alt="" />

06/25/2020

Is Hitachi air-conditioning compressor Toshiba brand

"I obviously bought a Hitachi air conditioner. It was discovered that the air conditioner used a Toshiba compressor during maintenance." A few days ago, some media reported this complaint about Hitachi air conditioners. Therefore, many consumers questioned the difference between the case and the internal machine brand: the purchase clearly identified a certain brand, why did you change the brand of the contents inside without telling it? Is there any difference between the products of the two brands? What if the after-sales service is not guaranteed?

07/22/2020

Method for identifying failure of hermetic refrigeration compressor

The resistance between running terminal (R), starting terminal (S), common terminal (C), RS is greater than the resistance between SC and RC. The resistance between RS is equal to the resistance between SC and the resistance between RC.

09/05/2020

What are the benefits of permanent magnet variable frequency screw air compressor So good

The permanent magnet variable frequency screw air compressor can change the air intake of the host by changing the speed of the host according to the required air volume.

08/15/2020

How to match the chiller with plastic molds and injection molding machines

As we all know, chillers are widely used, and one of them is the cooling of plastic molds. Basically, most plastic mold production plants are indispensable to the chiller, so today I will specifically introduce you here.

09/18/2020

Jingliang Electronics-Air Compressor Sensor Solution

——High-quality, cost-effective to provide customers with perfect sensor solutions Precision Electronics-MEAS (MSI) Sensor Co., Ltd. is a precision electronic engineering expert who masters the world's leading silicon micromachining MEMS technology.

07/24/2020

Introduction to screw refrigeration compressors and precautions for use (technology sharing)

　　Screw refrigeration compressors and piston refrigeration compressors are the same in terms of gas compression, and both belong to positive displacement compressors, that is to say, they both compress gas by volume changes.

08/17/2020

The quality of the cooling medium affects the cooling effect of industrial chillers

After enterprises purchase industrial chillers, when the cooling performance of industrial chillers decreases during operation, many enterprises think that it is related to the failure of industrial chillers.

08/09/2020

How to deal with the refrigerant leakage of precision air conditioner in computer room

As we all know, the power density of equipment in the computer room is high, so the volume heat is high. The computer room for exchange and data still needs to be continuously cooled by air-conditioning compressors to meet the environmental temperature requirements of communication equipment.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start