CDE Capacitor DME10S27K-F
Type: Capacitor
Brand: CDE
Type: Capacitor
Brand: CDE
Type: Capacitor
Brand: CDE
Mean Well Power Supply S-3000-110
Sanyo Denki Fan 109S474UL
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
HIGH-TECH Vane Pump 42V45A-1A22R
EAO Switch 51-395.025D
01/18/2023
VVT refers to variable valve timing. It adjusts the amount of intake (or exhaust), as well as the timing and angle of solenoid valves opening and closing according to the operating conditions of the engine.
06/23/2020
1.If it is because of the weather, you need to change the refrigerator to another location. 2. When used in winter, you can turn on a compensation switch in the refrigerator. 3. It is necessary to check whether the compressor is damaged. 4. If the modulation gear is incorrect, you can adjust the gear higher. 5. If the refrigerant is not enough, the problem of non-refrigeration can be solved after the fluorine content is added.
12/24/2021
In recent years, it’s probably difficult for people to choose between central air conditioners and split air conditioners for home use. In fact the time that central air conditioners are used for home refurbishing is not long yet.
09/18/2020
The noise of the piston engine is loud and the maintenance is inconvenient. Most piston machines often have problems during use, which brings great inconvenience to users. At the same time, it can reduce the production cost of the factory, increase economic benefits, facilitate equipment management, beautify the company's environment, improve company image,
07/24/2020
The structure of the piston refrigeration compressor<br></br> Piston refrigeration compressor is mainly composed of three parts: working chamber part, machine base part and auxiliary system lubrication, cooling, etc.<
08/11/2020
The selection of the installation site is most ignored by the staff. Often after the compressor is purchased, you can find a location and use it immediately after piping. There is no prior planning at all.
06/14/2020
09/09/2020
1.Compressor power and pressure: 1. The shaft power of the compressor is the sum of the indicated power and the friction power. The indicated power is the power directly consumed by compressed gas, the friction power is the power consumed by overcoming mechanical friction, and the shaft power of the compressor is the power used to select the drive motor.
01/31/2023
The gear reducer is an independent enclosed transmission gear between the prime mover and the machine, which is used to reduce the speed and increase the torque to meet the work needs.
03/02/2021
1.Positioning or residual torque: when there is no current passing through the winding, the torque required to make the output shaft of the motor rotate. 2.Driver: an electrical control device used to run the stepping motor. This includes power supply, logic programmer, switching element and a variable frequency pulse source which determines the step rate. 3.Dynamic torque: the torque produced by the motor at a certain step rate. The dynamic torque can be expressed by PULL IN torque or PULL OUT torque.