CMTEC Tool for Metal Cutting S220 D12X35X75
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
Panasonic Servo Motor MHMF022L1V2M
Honeywell Solenoid Valve VE4025B1045
ROTEN Mechanical Seal 8E5K-22-X
SANDSUN Overload Pump VA08H-760
GS Battery 6-QW-60(450)-(55D23L-KR)
Rechi Compressor 44R273A
MINDMAN Air Cylinder MCQV2-11-40-200
Mitsubishi Compressor YB645WTG
AirTAC Air Cylinder RMSP16X450
ADDA Fan AD0848XB-F71DS
VTOZ Proportional Valve MA-HZGO-A-031/50
Yaskawa PLC JAPMC-CM2320-E
Recent related posts
-
07/23/2020
9 usage details that affect the life of air conditioners
1. Clean the air filter frequently. Usually clean once every 2-3 weeks. The steps are: remove the panel; pull out the air filter; clean the air filter. Rinse the air filter under the tap. Since the filter is made of plastic frame and polyester silk, it should not be cleaned with hot water above 40℃ to prevent shrinkage and deformation.
-
05/23/2022
What is A Safety Light Curtain?
Safety light curtain is a safety certified light curtain product, which is composed of two parts-light sender and light receiver.
-
09/10/2020
Air compressor installation rules
1.Installation The selection of the installation site is most ignored by the staff. Often after the compressor is purchased, it is randomly located and used immediately after piping. There is no prior planning at all. Little did they know that such a sloppy result would cause future compressor failure and maintenance difficulties and poor compressed air quality.
-
08/10/2020
How to choose refrigerant for high and low temperature alternating damp heat test chamber
There are many kinds of refrigeration used in the high and low temperature alternating damp heat test chamber, and different refrigerants have very different uses and application ranges. Today, we will focus on explaining the main refrigerants on the market.
-
09/11/2020
Thrust bearings
Thrust bearing: Rolling bearing mainly used for bearing axial load, its nominal contact angle is 45-90 degrees. According to the difference of nominal contact angle, it is divided into:
-
07/15/2020
ZP57KUE-TFD4.8HP 60Hz (R410A) air conditioning operating conditions Emerson Copeland compressor
Today I want to introduce the Emerson Copeland compressor ZP57KUE-TFD for R410A refrigerant in 60Hz three-phase electric air conditioning. The power given in the manual of Emerson Copeland Scroll Air Conditioner Compressor is 4.8 hp, and other technical parameters can be downloaded from our company's website to download the product manual.
-
08/02/2021
Mitsubishi Heavy Industries - Haier Vs. Toshiba Commercial Air Conditioners
Because of the acceleration of urbanization, commercial air conditioners have developed rapidly in recent years.
-
08/20/2020
The difference and advantages and disadvantages of air duct machine, water chiller and multi-line
1. Ducting machine-Ducting system duct type system, as its name implies, uses air as the conveying medium. It uses chillers to centrally produce cold energy, cools/heats the fresh air, mixes it with the return air, and sends it indoors.
-
06/16/2020
Working principle of automobile compressor
Working principle of automobile compressor Car compressor The function of automobile compressor is to transform the low-temperature and low-pressure gas refrigerant from the evaporator into high-temperature and high-pressure gas refrigerant through comp 器2 䀀 ᅵ皥 䖒皦즠Ʋ㉄ᰙ
-
01/26/2024
Computer Room Air Conditioning: Work Principle, Characteristics and Technical Requirements, Benefits
Computer room air conditioners (CRACs), to put it simply, are air conditioners dedicated to computer rooms.