Contrinex Sensor ND8-S5S1-M18S

09/17/2025

Common Faults and Troubleshooting of Gear Pumps

Gear oil pump can be used as oil transfer pump, lubricating pump, booster pump, and fuel pump, suitable for hydraulic systems of machine tools

09/03/2020

Commonly used selection marks for compressor lubricants

1) Air-cooled piston shaft output power <20kW, select 32, 46, 100 (ambient temperature <-10 ℃ optional 32) DAA, DAB, DAC air compressor oil;

09/15/2020

Adjustment of main machine clearance of twin screw compressor

I repaired a main engine with locked rotor in the early stage. It is an EP200 model produced by Ingersoll Rand in 1997. Before I repaired it, Ingersoll Rand itself could not repair it. Because the main engine was severely deformed and the rotor and cavity Severe body adhesion.

06/29/2020

Several causes of compressor burning

09/14/2020

Selection guide for air compressor

Selection of working pressure (exhaust pressure): When the user is preparing to purchase an air compressor, first determine the working pressure required by the air end, add a margin of 1-2 bar, and then select the pressure of the air compressor (the margin is considered from the air compressor The pressure loss from the installation site to the actual gas end pipeline distance, according to the length of the distance between 1-2 bar, appropriately consider the pressure margin)

12/13/2021

How to Add Encoder to Stepper Motor

When the current flows through the stator winding, the stator winding produces a vector magnetic field. The magnetic field will drive the rotor to rotate an angle, so that the direction of magnetic fields of the rotor is consistent with that of the stator.

09/21/2020

Application of industrial wireless remote control in industrial driving

Industrial wireless remote control technology mainly uses wireless transmitters to transmit human operation instructions to a remote receiving system through digital encoding and encryption. The receiving system restores the control instructions after decoding and conversion, and realizes the control of various mechanical equipment. Control;

02/15/2022

Factors Affecting Service Life of the Air Compressor Oil

Maintaining the air compressor oil is critical to the compressor’s performance.

10/05/2023

Freeze Drying vs Dehydration: Is a Freeze Dryer and a Dehydrator the Same Thing

When it comes to preserving food, there are a variety of methods that can be used. Two of the most common methods are freeze-drying and dehydrating.

08/29/2020

Talking about the Modification and Selection of Air Compression Station

In the actual operation of the factory, it is often encountered that the rated gas production of the air compression station is quite different from the actual gas demand, the work load of the air compressor unit is low,